[VT Sniper]

Ok getting this thing sorted out finally! Big thanks to all those they gave me advice and suggestions.  Looking for recommendations for a lift kit for the 2011, I saw where someone used a RZR kit with mods, but I am looking for suggestions as to what kit should I buy and where can I get it. I understand they are a bit pricey but I believe it will be money well spent. Thanks

[REDRIDER]

Just make sure it is a bracket lift and not a spring spacer lift. If it's a trail I wouldn't go more than 2 inch. Personally I wouldn't lift a trail at all I would just get as big a tire as I could fit under it.  I have a EX and I have a 2 inch bracket lift I modified from a RZR for $50. I would probably just buy a kit that kit if I were to do it again. I have 29" tires, works perfectly for my purposes

[bigjimstewart]

https://www.ebay.com/itm/Polaris-RZR-ATV-2-Lift-Kit-RZR-800-EFI-RZR800-MADE-IN-THE-USA/191936701343?hash=item2cb051a39f:g:ShwAAMXQ-BZQ9hmt&vxp=mtr

There is a 3 inch kit as well I used the 3 inch on my z6 a couple years ago no issues yet.

[VT Sniper]

Thanks for the recommendations
BigJim did that RZR kit fit with no issues? Any mods required? Thank you again

[Coloradocrawler]

VT Sniper,

I ran the lift kits for several months but removed it due to the harsh ride. Our 600's will fit 28" tires without a lift. I have since went to a slightly longer shock and with a tiny bit of preload I now have the ride height I was looking for.

[VT Sniper]

Coloradocrawler,
I read your posts on the shocks. You went with the shocks out of a Wildcat right?  I was thinking of maybe trying that mod, I was thinking of trying to run shocks on the rear with the lift in the front. Atleast until I can afford all 4 shocks. What was the length of the rear shocks you used?
Thanks for the info

[frankysfree]

Personally I wouldnt lift it. Mine is stock height and stock tires and it went through some harsh rocky trails no problem. Used the skid plate a couple times but nothing serious. When I talked to CFMoto about my shop being a franchise dealer for them, the guy I spoke to, when I told him I owned the Z6, said that those had an issue where the driveshaft was slightly to short causing them to come out if you jumped them or anything. I will be changing my shocks soon so maybe Ill add some preload to raise it slightly but other than that I have no issues with the height...

[Derfer22]

3" RZR lift 28" swamp lite tires on my 2013 Z6; over 700 miles on it so far after lifted.