Hi. Does anybody have skid plate for cforce 450/520 from aluminium and what type. Does it worth it?
Tnx

[2015 Z Force 800 53/Trail EPS]

Welcome. Talk with Iron Baltic. They have the best ones. And yes, a good skid plate is worth having. Here is the link to their site.

https://ironbaltic.com/eu

Hi...tnx for the answer
I found this one? Any good?
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F173385592115

[2015 Z Force 800 53/Trail EPS]

I wouldn't know. Maybe someone else here would though.

Tnx...anybody have any info?

So ginally i decided to make my own skid plate. Total 15houres labor. Used aluminium 4/5.5 thickness, price was 90euro, inox screws & others stuff 25euro.
Here are some pictures.
https://postimg.cc/gallery/glefbw6m/

Nice skid plate.😁😁

DO not buy the CFmoto skid plate. Mine snapped of first day out. Very thin aluminium held on by two tabs and bolts on the front. The two tabs broke off and the plate bent back 180 degrees. Not good.

So ginally i decided to make my own skid plate. Total 15houres labor. Used aluminium 4/5.5 thickness, price was 90euro, inox screws & others stuff 25euro.
Here are some pictures.
https://postimg.cc/gallery/glefbw6m/

Any chance you can share the dimensions? i want to build my own as well

I've built my own out of 22ga sheet metal, and the first one took an hour or so, the second only a few minutes.  But honestly, the Iron ones are worth it to me.  I made mine as a temporary solution as the rear plastic ones get destroyed by rocks pretty quick.  You can use the plastic one as a template, which is what i did.

I have 3 cfmoto's , 2 500HO 2020 AND A 2019 CFROCE600 TOURING, all iron Baltic, i tried rival and it was a shi-show trying to get the correct ones the first time, they even sent front brush guards by accident! anyhow, about 375-ish each and went on in a breeze, the directions are amazing as well and super easy to follow. everything is numbered.