Morning people anyone have the link for a workshop manual i have a 18 zforce that has a strange issue.

It was not kicking in the fan so checked the fan with a power probe and it flicks stright on.
Checked and swapped the relay still randomly comes on when it likes.
So checked the temp sensor ie removed it and warmed it up with heat the temp on the dash didn't go up so thought right temp sensor must be dead.... refited the sensor and now have a constant fast flashing EML light and its so hard to now start and when you do get it running it kinda runs like its miss fireing lumpy as hell. So went to the obd port and found the wiring had already been messed with i had to put a 12v feed to the port to get it to turn on the reader when it did turn on it had 3 codes

Map sensor
Throttle postion sensor
Temp sensor

All saying circuit high

Im now at a loss as to what to do because i dont want to have to buy a load of sensors that i might not need any help would be much appreciated

[2015 Z Force 800 53/Trail EPS]

It just means there is a system power problem..not that all those sensors have a problem...usually I have a manual and will send you a download link by PM. Check the trouble shooter first. Be sure to take that mess apart and repair it properly...with solder and shrink tubing. There's probably more somewhere else.