Brake Fault Warning Indicator wont go away

Started by apinkbunny, August 15, 2022, 06:23:47 PM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic

apinkbunny

**
Junior Member
Posts: 5
Logged
apinkbunny
Junior MemberPosts: 5
Anyone else had a problem with the Brake Fault Warning Indicator not going away, I have checked and added brake fluid and still showing.

The manual says:

Brake Fault Warning Indicator
This indicator displays when brake fluid level is very low. Add DOT4 brake fluid and contact your dealer. Low
brake fluid level may lead to air in the brake system, causing brake fault and lead to serious accident.

Do I have to reset the warning somehow, My local dealer said that it might be the ABS and theses no reset...  (I am 99% sure it doesn't have ABS) So you can see the crappy support I get in New Zealand...

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
No ABS systems on UTVs. Some have had the brake switch go bad. Not sure if it has a second function. See if you can find it, remove it and test it. Not sure if it's built-in though. And I don't see in in the parts list. Make sure the brake peddle is adjusted so it has some play at the top. This will ensure the master opens the return ports.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube