Long story short, Rebuilding a Zforce 1000 that met its very early demise due to a tree travelling at a relatively high rate of speed.

I did a complete frame swap and repaired what was damaged along the way. I'm down to the very last thing. ON this one, one large brake reservoir is mounted above the master cylinder. From the bottom of this reservoir, there is a pigtail about 10 inches long with a white plug on it, I cannot for the life of me find the plug it connects to.

Unfortunately, I already have the hood and headlights back in so I would like to avoid taking it apart if I can at all help it. I am 90 percent sure the plug for it is in the bundle that comes out of the main harness by the master cylinder but this pigtail just seems too long.

Is there anyone on here that has a similar machine and could maybe send a pic of where this wire goes? It's the only white connector in the whole machine and just cannot find it.

[2015 Z Force 800 53/Trail EPS]

Got to be close somewhere. My guess if it does go anywhere it will be to the harness on the other side of that upper frame. Taking the storage tray out might give a better view.

I agree, Its has to be within 10 inches of the reservoir, I am actually thinking it may be back under the ECU somewhere, Still looking for it

[2015 Z Force 800 53/Trail EPS]

I agree, Its has to be within 10 inches of the reservoir, I am actually thinking it may be back under the ECU somewhere, Still looking for it

Yeah probably got folded-back under something.