0 Members and 1 Guest are viewing this topic.

*

Offline apinkbunny

Brake Fault Warning Indicator wont go away
« on: August 15, 2022, 06:23:47 PM »
Anyone else had a problem with the Brake Fault Warning Indicator not going away, I have checked and added brake fluid and still showing.

The manual says:

Brake Fault Warning Indicator
This indicator displays when brake fluid level is very low. Add DOT4 brake fluid and contact your dealer. Low
brake fluid level may lead to air in the brake system, causing brake fault and lead to serious accident.

Do I have to reset the warning somehow, My local dealer said that it might be the ABS and theses no reset...  (I am 99% sure it doesn't have ABS) So you can see the crappy support I get in New Zealand...

*

Offline NMKawierider

Re: Brake Fault Warning Indicator wont go away
« Reply #1 on: August 15, 2022, 06:40:10 PM »
No ABS systems on UTVs. Some have had the brake switch go bad. Not sure if it has a second function. See if you can find it, remove it and test it. Not sure if it's built-in though. And I don't see in in the parts list. Make sure the brake peddle is adjusted so it has some play at the top. This will ensure the master opens the return ports.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube