[rohlando]

Hello, I have recently purchased a 2022 ZForce 950 Sport which I know does not have turn signals. Does anyone know of a kit that is plug-and-play? Additionally, does anyone know if the headlights and tail lights are factory equipped and just not active?

[Black5heep]

https://cfmoto-forum.com/how-to's/turn-signals-6348/

Justin the Creator on youtube has done this and has some good instructions on what to do.    The factory lights have the ability to be used as turn signals you just have to tap into the wire.   

I have looked for a factory kit but have never found one for the z950.   I just went this route bought all the parts and did it myself. 

[wildmam_001]

5ASV-169060-6001    TURN SWITCH
FLASHER - CFMOTO OEM - 5BY0-150340

Will get front turn signals.

[MIKEB76]

The flasher you listed does it work for the 2022 ho ex model as well?

[DesertDual]

I just installed these two parts and the switch for 4-way flashers in my 2022 Zforce 950 HO EX and they work just fine however, flash a little faster than I would like. The 4-way switch part number is 5ASV-169070-6001. Local dealer said flasher was not available, but I got it online. There were only three open connectors, and I connected the turn switch to the top connector, the 4-way switch to the bottom connector and the large connector hanging by the ESP motor to the flasher. I didn't see where to mount the flasher, one comment I read said you must buy a bracket to mount it. I just tied it onto the wire bundle above the ESP motor until I find it. I got the parts from ttmotorsports.com. The switches were a little cheaper that curren and I didn't have to pay the extra $12.00 they want for shipping insurance. Got them very quickly. Oh, still fronts only, need to look into the back lights now.

[DesertDual]

I will be a lot more careful how I put those plastic push rivets back in from now on. I bought that plastic rivet remover pliers from Harbor Freight and they are a breeze to get out. But the rivets have to be turned correctly to be able to grab them with the pliers. Got the rear turn signals kind of working. I bought a non-powered trailer converter from the local auto store and they work but only flash once on the back for two flashes on the front. Will probably looked for a powered converter and install that this winter. Had the plastics all off on the back, will be much easier to do the second time. Checked the valve adjustment while I had the plastics off, glad I did. The front cylinder had one of the exhaust valves out of adjustment on the minimum clearance side.

[vulcan]

The flasher you listed does it work for the 2022 ho ex model as well?

Just installed the two parts listed above on my 2022 950 HO Sport and they work as mentioned, they blink a little fast. It was super easy and will be wiring in some rear signals tomorrow. Very happy with this. Driving on the streets of LC, NM to get to the trails can be a little dicey at times so turn signals will be great.