2019 zforce 500

So the standard push the select button and turn the key on doesn't work on this latest version of the gauge cluster to correct the speedo. I've tried all variations of buttons, key cycles, etc. my contact at the dealer doesn't have any service info because there new to the CFMOTO brand. He said he would keep me in the loop when they get the program tools and such. I've already done my Cforce, both vehicles came from the factory programmed as a 33" tire, I'm not sure why that's not fixed at the factory but whatever. Anyone managed to figure out the back lit display version starting in 2017? It's the back lit version, looks similar to the 2015 units just a little updated.

[2015 Z Force 800 53/Trail EPS]

I have not heard..yet.. but as I recall there are two ways to get to the calibration screen on the 15s. One is hold both buttons down whine turning the key on but the other was while the key was on, just hold..and I forget which but -either both buttons down or just the left until the cal screen cones up. When done I think you have to hold both buttons down until the normal screen comes up to save the settings so maybe it's both while the key is on.  Worth a try anyway.

By the way- welcome to the forum

Thanks I talked to you via YouTube about your spring swap on yours. I'll be getting those later this summer when my ride season comes back, I don't ride in the summer months, July to end of September is my down season on the east coast here.

Yeah I tried all those variations already, still nothing. I'm considering taking the cluster out and looking for settings, but my next step will be trying to get into the system threw my scan tool. The 19's use a bosch ecu instead of the Delphi which I believe you have. But the way if you have the Delphi MT05 ecu you can run a powercommander in there to dial in ignition timing and run multiple tunes. Just a heads up if you didn't know that.

[2015 Z Force 800 53/Trail EPS]

Good info. At the moment I don't have any need to make any changes but never know what the future may bring...lol