Good evening - my 4WD drive switch is broken the red button broke off when I snagged it with a towel, and I want to replace the switch. I have ordered a replacement switch but I am struggling to see how I will remove the current one ... I tried removing the hood and storage under it but that seems too far ... it feels, but I. Am not sure if I pull 7 push pins and remove the black portion of the left front fender/panel I should be able to reach it.

I am posting this also in the ZForce 500 forum, this is a 2021 Zforce 500 Trail ... any tips on reaching that switch are appreciated

[2015 Z Force 800 53/Trail EPS]

Yeah pull that panel. Looks like it's easy access after that.

Well ...yes removing the fender is my way of getting there.

In short, using a trim push pin removal tool, I removed enough push pins and 2 bolts on the front left mud flap to allow the opening to allow me to unscrew 3 Phillip screws holding the switch to the dash .

The cable connection is more behind the middle of the dash and I took of the hood and plastic tray under it to let me shine a light in there.

I was able to disconnect the old cable and plug in the new one , test the new switch from Curran RV (CF Moto Parts) and put it all back together!