Has anyone added a wireless remote to their winch on a 600T?    I "think" I found the relay, under the hood?   I am wondering if I can even get it out...the back bolt....could I get it back in there?  Next question would be whether or not it will pull out far enough to splice wires to it?   It is very tight.

Insight from those who have done it will be appreciated.  Pics?   

I am hoping to find out the same thing. I ordered a remote but trying to figure how much I need to tear apart to install it.

[2015 Z Force 800 53/Trail EPS]

I am hoping to find out the same thing. I ordered a remote but trying to figure how much I need to tear apart to install it.

Most remote controls just electronically bypasses the manual switching so all you need to do besides give it keyed power and a ground is tie it into the manual switch wiring. One to the Hot, One to the "IN" and one to the "OUT" wire. Then you can have both if needed. Cake.   

After reading reviews on cheap wireless remotes, I decided to go with a wired remote. Will install the plug near the cig and usb ports.

I am hoping to find out the same thing. I ordered a remote but trying to figure how much I need to tear apart to install it.

Most remote controls just electronically bypasses the manual switching so all you need to do besides give it keyed power and a ground is tie it into the manual switch wiring. One to the Hot, One to the "IN" and one to the "OUT" wire. Then you can have both if needed. Cake.

Thanks.

I just installed an Amazon wireless remote on my 2022 cforce 600 and it works great. There are plenty of YouTube videos that show how to wire it up. Less than $20 on Amazon