[Enocturno]

Hi all, my x6 just started to have problems with the reverse sensor, activating rev limiter sometimes. I am not an expert mechanic, i read the service manual but ibeasn unable to locate the freaking sensor to bypass it.  Anyone can aid me with some photos?  Thanks...

[NMKawierider]

If the X and the Z6 bith use the same engine, and I think they do, its # 9 in this photo:



That makes this it right here:

[Enocturno]

Thank you very much, it is very accessible right under the seat. Just cleaned the sensor, it was covered on dirt, tomorrow i will rock and roll and test.

Regards,

[Timryan81]

Which seat was it under

[jrunk]

I have a similiar question, my 2019 cforce 600 limits my reverse to 5 mph and isn't enough to get out of some mud, i would like to disable it, how would i do that? it seems i just have to cut some wire but i can't find any wire diagrams of this machine. please help.

[NMKawierider]

I have a similiar question, my 2019 cforce 600 limits my reverse to 5 mph and isn't enough to get out of some mud, i would like to disable it, how would i do that? it seems i just have to cut some wire but i can't find any wire diagrams of this machine. please help.

I just reviewed the CF 550 and it's wired the same as the Z800 as for the reverse limiter and indicator so I am pretty sure the same will apply for the CF600. They use the Sb/W(SkyBlue/White) wire from the switch to the indicator and the ECU. It has to be cut at the ECU to keep the light working and just null the limiter. Its on #18 of block J1. In the How to's, I have a video on doing this to a ZForce. Same will apply to yours just your ECU will be in a different place.

Your welcome.

[didj10]

Bonjour, pour ne plus avoir le problème du contact de marché arrière, j'ai ponté le contact de marché arrière (mis le fil du contact à la masse)
Pour avoir plus de puissance en marche arrière, il y a un bouton sur le guidon côté gauche qu'il faut actionné