Hi. I have a 2022 600. In the fuse box there is a relay labeled reverse lights. But none light up when put in reverse. Is there a wire at the back I could use to hook up my own back up lights.  Thanks

[2015 Z Force 800 53/Trail EPS]

Being new some will have a service manual but unless it's a hard copy, it won't have the wiring diagram in it. Hopefully someone here has one that can take a look.

Just wondering if anyone has had any luck finding a wire, or even checking the relay to see if there's power coming from it when the quad is put into reverse?  If not, I'll grab my meter and check it out. 

This black plug in the white holder above the rear wheel on the left side gets power when in reverse.

Hi. I have a 2022 600. In the fuse box there is a relay labeled reverse lights. But none light up when put in reverse. Is there a wire at the back I could use to hook up my own back up lights.  Thanks

So your Canadian model has turn signals, correct? The back up lights we have in the US are in the same spot as your turn signal lights. My guess is that the backup light circuit is at the rear. Probably is the black plug above the white on that I used for turn signals.

I have a 2020-2021 Service Manual. This pic is the wiring diagram for the tail lights.

I have a 2020-2021 Service Manual. This pic is the wiring diagram for the tail lights.

Is your service manual a physical book or a *.PDF?  If either, can we work something to get a copy for me?  Possible cost, or whatever? 

Appreciate your reply.

YMMV