I'm just curious if anyone has snorkeled one,or nows of a kit?

Thank you
Ozzy

[2015 Z Force 800 53/Trail EPS]

Not sure of a kit for either yet. Most have done their own in several different ways. I'm sure some variant of what was done on a Z8 would work.

Yeah I'm sure there isn't a kit out yet,but I would like to see if maybe someone has made their own. If so visual aids ( picture's, or video) would be great.
Thank you
Ozzy

I'm not doing a step by step thread. I just got bored today,and had this ag hose just laying around. I first had to remove the big ugly prefilter. I didn't do any specific fitment, or sizing I just cut,and installed.

Thats a pretty restricting bend you have on the adapter at the air filter housing. Might need to modify that a bit. That large pinch will restrict airflow really bad.

Actually the hose is so stiff it doesn't restrict at all,but I'm working on doing it all in PVC.

I finally started with the PVC. Only have two done for now. Here is a picture.

I finally got all 3 done the intake, CVT intake, and CVT exhaust.

Good job Ozzy that will give your tracker a long healthy life😀 that was the first mod I did I'll post some pictures and do a walk around of all the mods when I get some time also have a look at the small plastic hose on the bottom of the air cleaner ( crank case vent) mine was split I replaced it with rubber hose and proper hose clamps

Thank you! Tracker i just noticed from day one i didn't like how low the stock secondary air intake,or box was. I researched a little,and found out about the cvt exhaust being low,and at that point it was time to do something with it. I haven't done any other major mods yet,but i have a custom exhaust tip i might get around to finishing someday. To many iron's in the fire put a damper on other things.

Thank you
Ozzy