[wooddude]

I have a turn signal lever on the column, but no functioning signals. Does anyone know how to make the turn signals functional?

[NMKawierider]

I understood the units sold in the US didn't have turn signals. I think the wiring is there but not the correct tail lights, front signals or the relay.

[Cosmosdan]

Look at the headlights and you will notice that one of the sections is blanked out. You could rig in some leds in there or order the head and taillights that already have them. The service manual may show how they are wired in.

[Z8rider]

The wire harness on US models can accept the blinkers. Your dealer can order the CFMOTO parts. Replace existing taillight housing, add on front blinkers and a flasher.

A little side note, there is a wire harness change, so make sure your dealer is ordering the correct components for your wire harness. Check the front turn plug ins, if they are a gray or white connectors...

[wooddude]

z6 rider, lost the last part of your post. If the connectors are grey or white-----what

[NMKawierider]

z6 rider, lost the last part of your post. If the connectors are grey or white-----what

I think he means the color of those connectors will tell the dealer weather you have the revised harness or the original.