[terbob3]

2022
Its under drivers side front fender above shock tower

I looked and couldn't locate. The wiring diagram shows it having 3 wires, Grey, Green and Black/Blue. I'll look again later. Thanks.

[Arizona Bushman]

[/quote]

I did. I added to mine by tapping in to the wires on the switch assembly, turn signal relay, 2 led's in the front and 1 in the back. All in, I was well under $75. Beats the $600 for the CF kit
[/quote]
Where did you get your kit?

[terbob3]

I did. I added to mine by tapping in to the wires on the switch assembly, turn signal relay, 2 led's in the front and 1 in the back. All in, I was well under $75. Beats the $600 for the CF kit
[/quote]
Where did you get your kit?
[/quote]
I didn't use a kit, I bought individual parts. You can check you SXS first to see if the wiring is there and if it is, it would be much easier on you. All you would need to do then is get the flasher relay for you model and then add lights front and rear. on my 2021 U8, I did add a relay, lights and wired mine front to rear BEFORE I knew that I could have done the relay and used the existing. The good thing of having to do that, I know what I need to do with my 2022 U8. The wiring harness for turns is nowhere to be found. With that said, these are the lights I used..................
Rear, https://www.amazon.com/gp/product/B08BRY7Y9S/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Front,  https://www.amazon.com/gp/product/B019BT7A6C/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
If you can't do the factory relay, I tapped into the turn signal wiring at the switch and used this relay, https://www.amazon.com/Flasher-Blinker-Signal-Motorcycle-Modification/dp/B08FDKT47Y/ref=sr_1_4?crid=2DSI82AR0BCKQ&keywords=flasher+relay+for+led+turn+signal&qid=1668172483&sprefix=flasher+relay%2Caps%2C211&sr=8-4