I would like to put a 2" lift on my Uforce 800. Does anyone know who makes one?

There isn't one out there. If look back on here there is a post about 30 inch tire's,and pdermia I think it is made a lift. I think the lift was made for the Kawasaki teryx,and he just modified it.

I myself would like to try a aluminum spring spacer lift. My problem is that in not sure what size I would need to fit on the spring. If anyone could come up with that info I will order some,and try it.

[2015 Z Force 800 53/Trail EPS]

I can't see CFM using a different size spring on the Us then the Zs so..if that's true, the SATV lift spacers should work.

I think I might call Side by Side Stuff up and see if the shock spacers fit on the UForce. Shure would be an easy way to go.

There is major problem with trying to lift a u8, the rear diff sits off to onside, so any amount of real lift and you'll smack the frame.

There is major problem with trying to lift a u8, the rear diff sits off to onside, so any amount of real lift and you'll smack the frame.

Ya got that right wheels. It's pretty close on the passenger side

What's the difference between the 2" aluminum spacers and just cranking down the pre load 2"? 

[2015 Z Force 800 53/Trail EPS]

Wow...I had no idea...

At least the diff sits between the arms and the axles are pointed down. You might get away with it. Would the rzr plate lift work. At $50 it's not a huge risk. If bought on amazon, you could send back easy.

Put a jack under the rearend and jack it up 2". If the axles don't hit the frame, it should work.

[2015 Z Force 800 53/Trail EPS]

I know it's expensive..but they did adapt a set of these to a Z8 and it does give 4"s of lift.

http://www.superatv.com/Polaris-RZR-900-2011-2014-Portal-Gear-Lift-P12910C1643.aspx