[214skier]

Hello forum!  I have a 2022 UF600 with full cab, hard doors.  Has anyone had any luck finding side mirrors?

[NMKawierider]

Seizmik makes the preferred aftermarket mirrors for all UTVs.

https://www.seizmik.com/product-category/mirrors/side-view-mirrors/
 

[Petroni]

I'm getting my doors tomorrow and I will be looking for mirrors as well.  Not sure how they will work with the suicide doors though-unless they mount to the door.  I might have to make a mount for the tube mount mirrors I have.

[NMKawierider]

I have them on the bar and also have the suicide doors. No problem. Although because I have a windshield I wish I had got the ones with smaller or narrower mounts. Still..not a biggie to adjust the mounts. Doesn't look like they even make the ones I have anymore.

[Petroni]

I have a leftover (new) wired back up camera I'm going to install above the hitch, will see how that works for visibility.  When I first got the UTV I was a little surprised about the lack of included rear vision items...which was none.

[NMKawierider]

I have a leftover (new) wired back up camera I'm going to install above the hitch, will see how that works for visibility.  When I first got the UTV I was a little surprised about the lack of included rear vision items...which was none.

Yeah mine came with the cheapest side mirrors ever. Useless. When I broke one...I can't believe I actually bought a new one to replace it. The center rear-view was a good investment.

From Cedar Crest ah. Beautiful up there. Glad to have you with us.

[Petroni]

Yes Cedar Crest is nice, only have 2 acres but my backyard is the 11k Sandia Mtn...no UTV riding in the National forest but that's ok.
How did you insulate your roof?  I still have to mount the doors and figure out how warm it will get in the cab for snow removal.  I live at the end of a 1.5 mile private asphalt road hence the investment in snow removal, plus I have to make the machine workable for my wife and mom-in-law.  That way they can plow there way out if need be

[NMKawierider]

Yes Cedar Crest is nice, only have 2 acres but my backyard is the 11k Sandia Mtn...no UTV riding in the National forest but that's ok.
How did you insulate your roof?  I still have to mount the doors and figure out how warm it will get in the cab for snow removal.  I live at the end of a 1.5 mile private asphalt road hence the investment in snow removal, plus I have to make the machine workable for my wife and mom-in-law.  That way they can plow there way out if need be

Very cool. I didn't insulate my roof. Had no need to down here.. but did do some head and sound deadening to the interior plastics with that sheet stick-on stuff. Helped a lot.

[Petroni]

Oh, so noise insulation.....If spare time permits Ill make an engine cover-which is the only way to reduce the obnoxious noise coming out of the engine.  Kinda low on my to do list though.  Just a covering shell will make a big difference-better to bite the bullet and cover the motor to prevent vibe and noise getting into the cab than adding all sorts of deadening stuff in the cab... I think... I have lotsa toys to make it happen (3d scanners etc)...just need to commit.
Probably will get it figured out when I install my electric 1k dump actuator. 
I also have a spare hydroelectric actuator that Im going to mount on the back for a back blade.
maybe I should have just bought a BOBCAT ToolCaT

[Petroni]

I have a leftover (new) wired back up camera I'm going to install above the hitch, will see how that works for visibility.  When I first got the UTV I was a little surprised about the lack of included rear vision items...which was none.

Yeah mine came with the cheapest side mirrors ever. Useless. When I broke one...I can't believe I actually bought a new one to replace it. The center rear-view was a good investment.

From Cedar Crest ah. Beautiful up there. Glad to have you with us.

So with the new doors on and plowing 6 to 12 inches of heavy wet snow at 8 to 10mph I can attest that the 600 has enough heat to power the Inferno heater with Bypass Valve, the defrost kept the cab clear....Course I was in low gear...Engine was working-4600 rpm or so constantly.  Not cold outside (30) but with the heated seats I had to turn it down and shut off the heated seats-and open a window...
Back to the mirrors...I still cant see how the sides tube mounts will work with the doors unless they stick waaaay.  Mounted on the door, vision from the drivers position they wouldn't have to be so far out.
Which center rear view mirror do you recommend?  I'm sure there are lotsa options available.

[NMKawierider]

I have a leftover (new) wired back up camera I'm going to install above the hitch, will see how that works for visibility.  When I first got the UTV I was a little surprised about the lack of included rear vision items...which was none.

Yeah mine came with the cheapest side mirrors ever. Useless. When I broke one...I can't believe I actually bought a new one to replace it. The center rear-view was a good investment.

From Cedar Crest ah. Beautiful up there. Glad to have you with us.

So with the new doors on and plowing 6 to 12 inches of heavy wet snow at 8 to 10mph I can attest that the 600 has enough heat to power the Inferno heater with Bypass Valve, the defrost kept the cab clear....Course I was in low gear...Engine was working-4600 rpm or so constantly.  Not cold outside (30) but with the heated seats I had to turn it down and shut off the heated seats-and open a window...
Back to the mirrors...I still cant see how the sides tube mounts will work with the doors unless they stick waaaay.  Mounted on the door, vision from the drivers position they wouldn't have to be so far out.
Which center rear view mirror do you recommend?  I'm sure there are lotsa options available.

Yeah you guys got some snow out there today. On this side it was showing all the way down to the foothills for a while. I think its a matter of preference on the rear view. Needs to fit the bar, big enough to see what you need to but not so big it's in the way. I once though of a rear view with a built-in camera screen so I could put a camera on back. But never got around to that. I just got one like this but others that bought the long curved-type said they like them too.

https://www.amazon.com/MZS-UTV-Rear-View-Mirror/dp/B08HLXQ7LV/ref=sr_1_56?crid=1SY31GWBNCK8O&keywords=utv+rear+view+mirror&qid=1673912119&sprefix=UTV+Rear%2Caps%2C169&sr=8-56

[Petroni]

I'm only doing the backup cam as I have a new in box gathering dust.  It has sensors so no wiring to reverse.  Apparantly it senses the movement to turn on.  I still have a new long range 2 way autostart I want to wire in.  Have all the stuff and the schematics just have to get to it.

[NMKawierider]

That would be nice..for you guys that have to plow. Have it warmed up and ready.

[Petroni]

I don't know about the other models but the 600 has the Bosch Fuel InJ and EFI computer so its the same as a regular car.  So no oil pressure faults, no starts,  and the like will keep it from doing something stupid. 
You could probably even stuff a 30 dollar Torque Pro adapter in the OBD plug and put a 12 inch IPAD or ANDROID tablet on your dash!  Maybe a HUD?