[Simplysideways]

Hi Folks 
just got a 2023 600 eps and curious the torque on the nuts for the primary and secondary clutches
Thanks

[NMKawierider]

Hi Folks 
just got a 2023 600 eps and curious the torque on the nuts for the primary and secondary clutches
Thanks

Should be the same as the rest with that system so- 100n(74ftlbs) on the primary nut, 115n(85ftlbs) on the secondary nut and 60n(44ftlbs) on the primary retainer bolt.

[Simplysideways]

Cool , thanks . So a 300nm 1/2 impact driver should do to undo them

[NMKawierider]

Cool , thanks . So a 300nm 1/2 impact driver should do to undo them

Probably. Remember both primarys..the bolt and the nut are left-hand threaded and the secondary is a right. That means from the 12:00 position they either move to the right or left to tighted..not loosen.

[Simplysideways]

Thank you