[JBHVAC317]

I just got my first oil change, the mechanic said he adjusted it and greased the linkage maybe that's all it needed we will see for sure. Now that I got the first oil change over with I'm going to change the oil myself pending i get a ok from the dealership. I bought the extended warranty and want my rig to last for at least a solid 10 yrs.

[NLSXSRIDER]

Hey, i am waiting on my uforce 600. What size trailer do you have?

[NLSXSRIDER]

I was looking at picking up the Uforce 600.  Is the seat wide enough for two adults and a five year old child?

[NLSXSRIDER]

Hello All
Looks like I’m the first one on the forum with a UFORCE 600. I’ve only had it for a few days, so I’m still breaking it in and getting used to it. If anyone has question or wants detailed pic’s of something, i do my best to answer!

What size trailer is this ?

[NMKawierider]

Hello All
Looks like I’m the first one on the forum with a UFORCE 600. I’ve only had it for a few days, so I’m still breaking it in and getting used to it. If anyone has question or wants detailed pic’s of something, i do my best to answer!

What size trailer is this ?

Probably a 10'. With a ramp you won't want anything less then a 10'. If it were me I wouldn't go anything less then a 7'x10..or 12'.

[NLSXSRIDER]

Hello All
Looks like I’m the first one on the forum with a UFORCE 600. I’ve only had it for a few days, so I’m still breaking it in and getting used to it. If anyone has question or wants detailed pic’s of something, i do my best to answer!

What size trailer is this ?

Probably a 10'. With a ramp you won't want anything less then a 10'. If it were me I wouldn't go anything less then a 7'x10..or 12'.

Thanks for the response. My UF600 is at the dealer waiting for the windshield to arrive. I'll pick her up on Aug 15. This is my first SXS. Just wondering how much milage I would get on average on a full tank (35L)with normal driving or flat terrain?

[Slinger812]

I’m having the same issue with shifting. Is there a proper way to adjust the cable?

My machine is quite new ( under 100miles) so not sure if it will just get better over time but, it sure is annoying!

[Petroni]

I posted in this thread earlier about shifting issues.  There's a YouTube vid of a guy who did it to a Cfmoto 4 wheeler.  I think this is it   

.  The idea is the same, put it in neutral when you adjust.  The 4 wheeler uses a rod, and the Uforce uses a cable.  The cable will stretch for a while so you may need to do very minor adjustments often.  Mines great now.  Access is under the passenger seat and should be a 3/4 wrench.  Just go one direction a little, if it gets worse go the other. 

[Tug]

I adjusted my shifting cable as mine was hard to get out of reverse or forward gears with or without tension on it. It shifts so much easier now. Lift passengers seat and remove storage box. You can easily see the shifting cable. I can't remember either an 8 or 10 mm wrench. Loose, adjust and tighten. It didn't take much.

[NMKawierider]

Good info. Thanks

[Petroni]

And I broke down and bought the doors.....I will still publish a dxf for the frame if peeps want to make their own.  i will still make them but I noticed a curve at the base which I am having a hard time figuring out if its a stock bend or a manufacture screw up... I just ran out of time, and had an abundance of overtime cash from work!!!
I also bought the Inferno heater.  If you install on you MUST get the thermostatic bypass valve, or you will get very little heat from that tiny motor.
Heater is a PITA to install, they need better picures!....You hearing that INFERNO.....

[Petroni]

Here is a front windshield DXF.  Im no plastics experts but the Pro's at the plastic shop said don't waste your money on "hard Coated" polycarbonate, just get regular.  I just used 3M VHB 30 lb tape to stick it in.   Been working great