My 2019 uforce wont start.  It just got serviced for its 10 hour milestone.  Ill be contacting the local mechanic for support but bringing it in for service again is a major pain and even harder now that it wont start.  Any advice would be helpful.  Thanks all

[2015 Z Force 800 53/Trail EPS]

The MIL light is flashing even after it starts so it has an input that is in error. May be fuel pressure...may be voltage..maybe one of the TB sensors. Because it idles then dies when the gas is touched says it might be fuel related or a bad TPS. Just a guess though.

Is it anything that could be related to the 10 hour service that was just completed?  It ran perfect before the service.  Also there is a strong gas smell when I try to turn the engine and accelerate. 

[2015 Z Force 800 53/Trail EPS]

Is it anything that could be related to the 10 hour service that was just completed?  It ran perfect before the service.  Also there is a strong gas smell when I try to turn the engine and accelerate. 

Well...take a look for a fuel leak.

I assume it ran when it left the shop.

Could it be related to the service? Only way to know is to find out what the problem is. What did they do for the service?

The ECU is complaining, so that's the first place to look. Do you have an OBD-2 reader? Easiest step is to see what codes are being thrown.

Fuel smell? Could it be the smell of a rich fuel mixture in the exhaust  from a freshly started cold engine? Or does it smell like raw gas? If the latter, I would inspect the fuel injection lines for anything wet.