0 Members and 1 Guest are viewing this topic.

*

Offline madspeed

2011 UTV500
« on: September 09, 2021, 07:13:47 PM »
Is there a scan tool that will work with these things to pull any cel codes? My cel flashes and certainly it must be pointing to a fault.

*

Offline NMKawierider

Re: 2011 UTV500
« Reply #1 on: September 09, 2021, 07:49:05 PM »
Is there a scan tool that will work with these things to pull any cel codes? My cel flashes and certainly it must be pointing to a fault.
Prior to 2018 you would either use the CFM scan tool..aka PDA, or the manual would outline how to make it flash the code.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline madspeed

Re: 2011 UTV500
« Reply #2 on: September 09, 2021, 08:47:46 PM »
Thx, I figured there had to be a way to scan the codes. I located a copy of the service manual and will check it out.