I have a 23 Uforce with less than 30 hours.  It is running rough and the check engine light is on.  We put the code reader on it and it has 3 codes.  P0501, P0151, and P0151 P.  Any ideas on where to look first?  Thanks in advance for any help!

[2015 Z Force 800 53/Trail EPS]

To my knowledge..from 2020 and up the fault code table changed to a longer number. Below is that table. But assuming your reader isn't getting the complete code, P0501 is part of the error code for the speed sensor and the PO151 is O2 sensor. I would start bt checking all the connectors for loose or water intrusion.

Check your fuses
There's a fuse under the hood in the fuse box think it says main it's a 10 amp will cause all them codes an idle I've tripped it on my 21
3-4 times my fault lol
But same issues