[aapa]

Long story but in short the bunch of main wires have been replaced in my utv by earlier owner (left side head light got on fire and some damages in wiring too). I noticed the wires (brown and green) from brake fluid reservoir are not connected and the connector does not exist anymore. I found one free connector under the hood but the wire colours do not match. Anyone knows if there should be a connector with brown and green in the set of main wires? Or could it be the connector with different coloured wires? thanks in adv.

[NMKawierider]

They usually will not change colors unless branching into or out of another system.

[aapa]

I found the connector. There was a jumper connection in it (a pin connected into b pin with a short wire) so that the brake fault would not lid when there’s no sensor connected. Wire colours were different which was a bit confusing. Anyway my problem is solved now.

[NMKawierider]

Good.