Hey guys, what the largest tire I could fit with zero modification on the 1000? I saw 30×9.5-14?

[2015 Z Force 800 53/Trail EPS]

Not sure myself but guessing because of the suspension design 30s on a UForce with no modifications..such as a lift and/or offset changes.. isn't possible. Might be wrong though...the new 1000s are a little different. Hopefully someone here has first-hand knowledge. Welcome to the group BTW.  

A set of 30s will
Fit with no worries but should also run a set of spacers thou I run 1.5" in the rear an 1" In the front
now if you are doing a tire an rim combo make just get off sets
an imo 10" wide all around

So has anyone put 30" tires on a stock machine and if so was there any rubbing?

Thanks in advance

I bought mine with 30s on stock rims. It had 2" spacers all around, but I removed the front spacers and went back to stock width. There was rubbing with the front spacers at full lock, but the stock configuration does not rub. I am thinking about going with smaller tires unless I decide to upgrade the shocks.