[Bleeb]

I reclocked to B2, and am still running up at 7500-7600rpm at WOT after 40mph to 60mph. I tried to video the acceleration from 5mph and up, but the camera could not capture the rpm numbers. The display was just was too bright against the dark rainy fog today. I think it started at about 7200rpm at the punch and climbed from there, but I had to keep my eyes on the road, LOL!

[Bleeb]

Here's a Rumble video of me doing a 5-60 mph run.
https://rumble.com/vrrekp-uforce-1000-clutch-kit-acceleration-5-60mph.html

[NMKawierider]

Nice. Seems to work well. Is it possible to mount the camera to watch the pod.. set on RPMs so we can se it along with the speed? Looks like it will need dimming a bit.

[Bleeb]

Nice. Seems to work well. Is it possible to mount the camera to watch the pod.. set on RPMs so we can se it along with the speed? Looks like it will need dimming a bit.

Did that this morning. I'm uploading it now.

[Bleeb]

Here's a closeup video of the UForce 1000's info display, showing rpm and mph, during a 5-60 mph acceleration run.

https://rumble.com/vrrimt-uforce-1000-clutch-kit-acceleration-info-display-video.html

[NMKawierider]

Wow...that stays on the power curve most all the way out. Sounds good..how does it feel?

[Bleeb]

Wow...that stays on the power curve most all the way out. Sounds good..how does it feel?

I think it's a little high on the revs, because it'll hit the limiter going on a slight downhill. I'd like it to be more in the 7000rpm range. It feels pretty quick, as you can see. I can almost keep up with my neighbor's modified 100hp Ranger 900 in a drag, but he gets me off the line and hold it by a length and a half.

[Lazydayz]

Do you know what spring you used 200/600 or 200/1600
0951-1014 or 0951-1017

[Bleeb]

Do you know what spring you used 200/600 or 200/1600
0951-1014 or 0951-1017

No I do not. The spring was all black, and was considerably shorter with thicker coil steel.

[Lazydayz]

Do you know what spring you used 200/600 or 200/1600
0951-1014 or 0951-1017

No I do not. The spring was all black, and was considerably shorter with thicker coil steel.

I just received mine
Both are black

There’s a lil tiny computer style writing on it
That says the part number
The 200-1600 0941-1017
Is shorter an thicker for sure

[NMKawierider]

Here's the regular list. 0941-**** is way down from this but one with the ratings 200/1600 is in here- 951-1017:

[Lazydayz]

Here's the regular list. 0941-**** is way down from this but one with the ratings 200/1600 is in here- 951-1017:

Ya I didn’t order a kit I just ordered springs an weights
Was half the cost lol

Maybe if bleeb changes his weights he might find the number on his

Steve from redneck suggested that spring but I read on here that the 200/600 could be the way so I ordered both lol

[Lazydayz]

Stock is blue org gold
21 uforce 1000