I purchased the horn kit for the Uforce 1000 XL.  Wish it came with instructions.  Has anyone completed this task?HORN ADAPTOR CABLE, CFMOTO OEM – 5HYV-150191-2900
HORN SWITCH, CFMoto OEM – 5ASV-169040-6001
ELECTRIC HORN, CFMoto OEM – 6060-150600

If it's similar to the UF600 there is a Youtube video by CF Moto USA/Curren RV that walks you through it. I did mine about a month ago. Easy peasy. I've added a horn, turn signals, flasher, and side mirrors purchased from them on my UF600. I'm not going to complain about the Canadian ones coming with these and a 5 yr warranty. Oh, I guess I did!

 I'm not going to complain about the Canadian ones coming with these and a 5 yr warranty. Oh, I guess I did!
[/quote]

Lol
Not sure why the USA versions don't come with the same
We can't even ride on the roads here it's starting to happen but not like down there

If it's similar to the UF600 there is a Youtube video by CF Moto USA/Curren RV that walks you through it. I did mine about a month ago.

I can't seem to locate the video by Curren RV.  I am thinking its no longer on their page.  There are two wire harnesses that plug into the rocker switch and I tried them both. At the other end I located the wire where the horn connects but once all together and with machine started the horn does not work. Am I missing something?  Would be great to see a video or have instructions.

I found it on their you tube page. Majority of their stuff is RV videos. See if this will work. I've never posted a video before.



https://youtu.be/rVGgQNJ9OHw?list=PLYFmGvPY3ik-4G8VxbAqn8uZv1tYmEo8T


EDIT: I repaired it for you. Just right-click on the video and copy the URL, then past that in your link.  NMK

Same problem as above, I tried both harnenesses with no luck ( it does light up). I will be looking for a 3rd harness, also will be checking the wiring. The center 2 wires of the connector are 12 volts, but the only N.O. contact on the switch are the top 2 terminals, so I don't understand how it would energize the horn relay. I'll update if I find solution.

Update:
There is a 3rd wire harness next to the ignition sw. Remove lower center compartmen to gain access for your hand. Plugged in the horn switch and 'Bingo' ( had to turn out small screw under a black plug on horn to get it to beep)
Hope this helps

Thanks for the responses.  I will be looking for that 3rd wire harness.  I am sure that will do the trick. 

Amazon sells a kit that is easy to install.


https://www.amazon.com/gp/product/B095C1F5LX/ref=ox_sc_saved_image_1?smid=AYGQT4AQ2N1HK&psc=1