Flasher 5HYV-161000-1G01. Turn signal switch 5ASV-169060-6001. Hazard switch 5ASV-169090-6001

For the 2023 the turn signal wire is not part of the connector to the tail light
it is separate with a pin connector on it and it is ty-raped up so i had to
remove the sides of the dump bed to get to it.

Good news for the 2023 owners when it come to turn signals for the U1000
all the wiring is in place. If you are doing after market you will tap in for the fronts
at the connectors. and for the backs the turn signal wires are already there next to the OEM
tail lights. You will have to remove the sides of the dump bed to get to them not to hard to do.
4 bolts and 3 screws. Use the OEM flasher and switch they plug right-in.

I have 2023 Uforce 1000 and use a weather tech cup phone in the cup holder on the dash
that gets it close to the charging ports.

What are some of you doing to secure items in your open dashboard cubby holes.
what works best ? any Pics.

CFmoto site for the uforce 1000 states that it is
CFmoto ride compatible

For the DIY turn signals you will still need to splice into the wiring
for both the front and back. For the fronts you would splice in just before the headlamp
connector. Or if you have the right tools you can add the pins and wire to the headlamp plug
For the back there are several different options

1. use a trailer convertor
2. Tap into the wiring like in the front
3. Convert the rear backup lights

There are videos on youtube for these

Found the location for the 2023 flasher see attached pic.
also new for the 2023 you no longer have to cutout for you switches
all the switch location are now removable blanks. 

That would be great. I ordered the flasher from
CFmotousaparts I had to call them to get the right part number
and he said they were going fast.

The 2023 Uforce 1000 will now use Flasher part number 5HYV-161000-1G01
but I have not found where it plugs in as yet. It is a completely different flasher
and mounting see pics if anyone knows please post.