Yeah that looks good. But what did you use plastic to clamp it? Also I think my dash is a bit different to yours

Use a black mesh laundry bag, flat clamp it like cfmoto does.

CVT Tuning General Rules

Here are some general clutching rules you should play by!

Primary clutch (Drive Clutch) = Front clutch off the motor

Secondary Clutch (Driven Clutch) = Rear clutch connected to drivetrain

Peak RPM = The RPM the machine sits and holds most of the time at WOT. This needs to be in your model's peak powerband for best results. (BMP supplies you with your optimum peak RPM when purchasing clutch kits)

More Primary Clutch Weight = Less peak RPM & greater belt squeezing force

Less Primary Clutch Weight = More Peak RPM & less belt squeezing force

Primary Spring Starting Rate = Controls Engagement

Stiffer Primary Spring Starting Rate = Higher engagement RPM

Softer Primary Spring Stating Rate = Lower engagement RPM

Primary Spring Ending Rate = Controls Up Shift, Back Shift & Peak RPM

Stiffer Primary Spring Ending Rate = Slower Upshift, Quicker Backshift, More Peak RPM

Softer Primary Spring Ending Rate = Faster Upshift, Slower Backshift, Less Peak RPM

Steeper Helix Angle = Faster Upshift, Slower Backshift

Shallower Helix Angle = Slower Upshift, Faster Backshift

Stiffer Secondary Spring Finish Rate = Slower Upshift, Faster Backshift

Softer Secondary Spring Finish Rate = Faster Upshift, Slower Backshift

Adding horsepower normally means you need to add clutch weight, go steeper on the helix angle, or both. Most small modifications only require adding clutch weight while larger horsepower modifications will require you to change both.  Not changing clutching when you add horsepower will result in over-revving

Just something I found on the internet after hours of googling.

I called Cfmoto and the person I talked to said he would find out about the nets and call me back.

So did they end up getting back to you at all about this?

Hi, Id be interested to know if and how you went with this. I have a uforce 600 2022 and have done the reclock. It made quite a difference, but would still like a bit earlier engagement.