I saw some unused plugs near where the turn signals would be.  I think the machines are already wired for them.  See if you get power in those plugs with stalk movement.  You might have to stick a relay or fuse in the appropriate socket in the relay/fuse box.

I'll be in the cfmoto factory Monday, I'll ask for you

Anything from the factory?

Bueller?

Anyone one know if there is a procedure for clearing the ECU codes without taking it to the dealer?  I did some engine work and the ECU picked up a few errors that no long exist.

Usually ,you can see part numbers on the side of the outside case of the valve. Motorcycle doctor-sells on e-bay and has some 800 v-twin parts. Other than that ,take it down to the auto parts store and what they can come up with.

Thanks I found the part on eBay.  Here is the IAC valve incase anyone needs it..
http://www.ebay.com/itm/201132307493

Not sure but here is one source for parts:

http://www.alpha-sports.com/cfmoto_parts.htm

Yeah I looked there.  Have to buy the entire throttle body.  Thanks.

There are dealer here on the forum or you can order parts from a dealer in your area and have it mailed to you if it's too far to drive. It's best just to get it from CFMoto, even if you find one that fits, it may not work right and then your out the money.

I understand that I can get parts from dealers and CFmoto.  But sadly, I'll have to order the entire throttle body just to get the IAC valve.  I was asking if anyone has a source where to buy JUST the IAC valve.

Did some testing via the service manual and looks like my high idle is from a broken IAC valve....


Anyone know where to get a replacement idle air control valve?

I cannot come up with anything.  It looks to be a Delphi unit.  Wonder if it comes off a particular make and model car and I could pick it up at autozone.

Kindly,
Mac