Anybody have recommendations? So far I have found a plastic set from Iron Baltic or Aluminum from Rival. Iron baltic looks good but it is HDPE instead of UHMW. Is that a deal breaker? (BTW I am looking in the US)

I took my rear wheels off this weekend. There are 5 at the each rear corner, 2 on the rear swaybar, and 2 at each front corner. Rear corners have 2 on knuckles(top & bottom), 1 on upper a-arm, and 2 at bottom a-arm. On the rear knuckles, I unscrewed the straight zerks and put in 45* zerks. I had to unbolt the top a-arm from the knuckle to remove and replace the zerks. I greased the machine before putting the wheels back on but now I should be able to catch the zerks through the wheels. Definitely put a rag on the rotor as they are close and grease could get on it.

Congratulations!  Pictures???

Hello all! Just brought home a leftover Uforce 1000 with plow and cab.

Congratulations.   Are you getting a 2021, or 2022?
[/quote]

Leftover 2021

So, I was going to rush and buy a Z with a plow because I wanted a plow and that was available semi locally. After thinking about it some more, I decided to go with a U1000 with cab and plow. Dealer is 4 hours away but it was a fair deal and he had it in stock. I pick it up Thursday.

I went to the dealership yesterday and "fit" into a 800. It was tight. I sat in Z950 and it was much better. Than we started talking numbers between freight and dealer setup it was $2300. Seems expensive so I backed out. Is that what it costs in fees for everybody else?

Looking at possibly buying a Z800. The dealer is an hour away. I'm 6-1 and 250 lbs. Will my knees be hitting the dash when I sit in this thing?