Looks good!
Here is the install instructions I found on your website.
Curious, what is the accessory to turn signal wiring kit found on page 20-21?
https://www.superatv.com/amfile/file/download/file/10232/product/97952/

I installed this kit in my 2021 U-force 1000 which cured the touchy throttle.
https://epiperformance.com/sport-utility-117/

In theory, your system was trying to charge a battery that wasn't chargeable, overloading the system.

I don't believe the airbox has changed on the Uforce 1000 since production, just the latch system on the lid.

Very nicely done!

https://epiperformance.com/sport-utility-117/

I just installed a EPI kit in mine.
No jerky takeoff or reverse anymore, pretty impressed.
Seems to have livened up the machine.

EPI is starting work on building a quality clutch pullers for CF Moto and looking for some information from those that have bought one or have access to them that can answer a few questions.

Firstly there shows to be two..in that although both have the same part number, one had an "A" at the end. Wondering what the difference might be if any.

The next batch of info is specs for verification. The shaft size(s) and where it changes, the thread location and it's size and pitch, noise size & length. And the head size. All this will be metric.

Any and all help is greatly appreciated. Thanks guys. This is the kind of info we are looking for:

[img]

NMK

I sent an email to CFMOTO turns out the only difference between the 0JY0-050000-922-002 and the 0JY0-050000-922-002A is different manufacturers.

I also have this puller as Arctic Cat also use some CVtech trailbloc clutches on their dirt and snow machines.
https://www.countrycat.com/arctic-cat-0644-650-gold-drive-clutch-puller-2019-2023-atv-utv-snowmobile

Factory clutch puller;
https://cfmotousaparts.com/product/drive-clutch-puller-cfmoto-oem-0jy0-050000-922-002/

Not sure but the same puller is listed under the Can-am 850 and 1000 engines.
https://umatek.com/en/atv-utv-sxs/cvt-clutch/drive-clutch-trailbloc/mmcv0900-0293-clutch-trailbloc-can-am-outlanderrenegade-1000-2012-22

I modified my Arctic Cat puller, same thread size 14mmX1.5.
Sorry, can't get a pic of it to upload

Image;

Here is a link with specs for the OEM puller, should have a 19mm head.
https://umatek.com/en/snowmobile/cvt-clutch/pullers/mmcv0155-1066-clutch-puller-cvtech

Never hit on a clutch puller with a hammer as you are affecting the crank bearings.
A good impact works best, only takes a few seconds.
Umatek is who builds these clutches now.
https://umatek.com/en/