Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Mike73B

#16
CForce 800 XC / Re: Trunk box options Canada
October 23, 2020, 06:44:53 PM
Great that shipping to North America is included.  Can you advise to the duty costs for Canada orders?
Thanks
#17
CForce 800 XC / Re: CVT clutch settings for cforce 800?
October 21, 2020, 04:47:10 AM
Hey NMKawierider
I'm planning on keeping the stock rims and going with 9's on the front and 11's on the back, possibly Zilla's.  Although a buddy of mine has a set of 27's he wants to off load cause he wants 30's for his machine and he is willing to part with them for peanuts. 
I'm primarily concerned with ground clearance as there are a lot of stumps and shit where I ride so I would be sacrificing a half inch if I go with the 27's but guess I can always grab Highlifters 1.5" lift and dial up the shocks to make up the difference.  Either way, I'm still thinking on the clutch kit as I want more throttle response..and if its only a matter of re-clocking the secondary to achieve it then hell...why not! I was hoping someone with a cforce that has done it could recommend a re-clock setting based on their experience rather than using the trial and error approach. 
#18
CForce 800 XC / Re: CVT clutch settings for cforce 800?
October 20, 2020, 03:39:18 AM
Thanks ROB PLUS, mind if I ask what was included in the "clutch kit"?  I'm thinking, and I could be completely wrong as its only from looking and reading forums and youtube but my understanding is that it would only be re-clocking the secondary and changing out the weights in the primary.  Granted one would need to know what weight  and setting to go with based off driving style and tire size.
Thanks again!
#19
CForce 800 XC / CVT clutch settings for cforce 800?
October 16, 2020, 03:36:58 PM
Hi All,
Looking for opinions on clutch settings for cforce 800.  Anybody re-clocked their secondary?  Im looking for more response but don't want to compromise top end speed.  I have a 2021 cforce 800 xc eps LX with stock tires.  I'm looking to increase to 28" tires.
Any advise appreciated...I have reached out to Airdam Clutches but unfortunately they must be super busy as I cant get a response after a couple emails.
Thanks in advance!
#20
CForce 800 XC / Re: Clunking from Drivetrain
September 19, 2020, 07:08:00 PM
Count me in...I bought a new 2021 and after 248 KM's the clunking started under the same described conditions.  I too brought it to my dealers attention, they did the break-in service flushing all the fluids to find nothing out of the ordinary, picked the bike up and tech told me "this is normal"...normal my ass!
What can you do...I have come to the same mind set...drive it and get it repaired under warranty!