Has anyone installed a Kolpin rear trail box 93201 on their Cforce 600?
If so, did it fit okay?
If so, did it fit okay?
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#2
Information Center / CFMoto Owners and Service Manuals On-Line
January 24, 2026, 08:36:30 PM
https://www.cfmotousa.com/owners-manuals
Owners manuals and Service manuals can be viewed on-line and/or downloaded for most models
Owners manuals and Service manuals can be viewed on-line and/or downloaded for most models
#3
CForce 600 , X6 / Clutch Upgrade on CForce 600 2022
April 19, 2023, 08:15:03 PM
I upgraded my stock clutch (Primary spring- 0951-1013... Gold-Yellow-Blue... 200 - 400 rate and 10g weights... to a 0951-1016 ... 200-1200 spring and 16g weights).
I had to use this tool from MSC in order to remove the primary bolt and nut...https://www.mainstreetcycle.com/shopping/item/2230/primary-clutch-holding-tool
I haven't had a chance to ride it much since the swap but I can feel a huge difference on the low gear end. It is much peppier and it starts moving approximately 300 to 500 rpm sooner than stock.
I also noticed that in 2wd Low the cruising speed of 20mph had a much lower RPM than stock but the power was still there.
So far, this clutch set-up seems to be much better than stock.
I had to use this tool from MSC in order to remove the primary bolt and nut...https://www.mainstreetcycle.com/shopping/item/2230/primary-clutch-holding-tool
I haven't had a chance to ride it much since the swap but I can feel a huge difference on the low gear end. It is much peppier and it starts moving approximately 300 to 500 rpm sooner than stock.
I also noticed that in 2wd Low the cruising speed of 20mph had a much lower RPM than stock but the power was still there.
So far, this clutch set-up seems to be much better than stock.
#4
Introduce Yourself and Your Ride / New ATV owner...CForce 600 2022 model
February 27, 2023, 07:27:56 PM
Wanted a new toy to replace my Indian. I like this ATV a lot. Looking for places to ride near me ( Madisonville, TN). Still doing the break-in so i haven't really opened it up or gotten up tp max speed. I will probally replace the primary spring and weights after break in. I don't really care about top speed, I'm more intetested in low end torque/ power. Don't care for mudding or rock/hill climbing. Mostly just trail riding.
For whatever reason CFMOTO didn't put a horn on these, so I'll be adding a horn kit soon ( its a safety thing). Maybe mirrors also. Not really sure i need them.
For whatever reason CFMOTO didn't put a horn on these, so I'll be adding a horn kit soon ( its a safety thing). Maybe mirrors also. Not really sure i need them.
Pages1