Sad to see her go.

https://www.facebook.com/share/14kZXPL9XW9/

Well I thought I had it fixed with contact cleaner at the throttle pedal connector but it didn't last long. It's idling weird, not taking input from the pedal, and it keeps coming back P2128 and P0606. It starts and runs at 2000-2600 rpm and pushing the pedal does nothing. I even tried unplugging the pedal and it will still run at 2000 rpm. Before I go buy a pedal can anyone tell me if there machine runs at 2000 rpm with the pedal unplugged? My theory is the pedal is sending voltage to trigger P0606 but if your machines idle fine with the pedal unplugged I may have to take it in for diagnosis.

I thought that this could be a good thread to discuss what you've done with your stock suspension to improve ride. I'm on 29" Bighorn and running the suspension at one click before full pre-load and it has helped a tremendous amount. I'm also running 10psi in the tires. Thinking about removing the rear track bar but would like to hear others experience.

Anybody have recommendations? So far I have found a plastic set from Iron Baltic or Aluminum from Rival. Iron baltic looks good but it is HDPE instead of UHMW. Is that a deal breaker? (BTW I am looking in the US)

Hello all! Just brought home a leftover Uforce 1000 with plow and cab.

Looking at possibly buying a Z800. The dealer is an hour away. I'm 6-1 and 250 lbs. Will my knees be hitting the dash when I sit in this thing?