I have a 2015 Uforce 800 and plan on doing some clutch repair. The clutch seems to be operating as should and no grinding when gear shifting but I believe my issue is in the assembly and the items circled in the attached pic. I want to replace both the back plate a guides and cant seem to find if this can be done without removing the motor on the Uforce? If someone has done this repair or knows if can be done without removing the motor please let me know.

Hello I have a 2015 UForce 800 and I have a clunking noise at idle and seems to be coming from inside the side cover. My question is is it possible this noise is coming from the clutch assembly because it only seems to be present at an idle and not when under a load which makes me believe it is not a lower end issue.

Does anybody know the torque setting on a 800 head bolt

Hello I purchased a top end rebuild kit and when I opened the package I discovered that one of the piston rings has a recessed area along the entire circumference. My question is should this recess be facing to the top or bottom of the piston. It is a aftermarket kit and the old rings dont have this?

Hello I am rebuilding the top end on my 800 engine and noticed it appears as if the base gasket on the cylinders has been installed with some kind of adhesive while the head gasket has no adhesive. Is this the correct way? Also when installing the pistons into the cylinders should I figure a way to compress the rings or should the bevel on the bottom of the cylinders allow the rings to compress on their own or possibly with a little help using my fingers or a non metallic object?

I am looking for a 2015 800 motor in good running condition it doesnt have to be complete I have the old motor which needs to be rebuilt but still has all the good parts available

Hello I have a 2015 UForce 800 and want to kow if a 2020 1000 motor will interchange without a buch of modifications?