couldn't find anything for my 2021, Only option was semi or full metal from the dealer.

Cela semble un peu élevé, mais le premier service, vous changez tous les fluides. Je suppose que toutes les fournitures sont incluses dans ce coût, cela semble élevé, mais dans mon coin de pays, je dirais que ce n'est pas extrême

I agree, Its has to be within 10 inches of the reservoir, I am actually thinking it may be back under the ECU somewhere, Still looking for it

Long story short, Rebuilding a Zforce 1000 that met its very early demise due to a tree travelling at a relatively high rate of speed.

I did a complete frame swap and repaired what was damaged along the way. I'm down to the very last thing. ON this one, one large brake reservoir is mounted above the master cylinder. From the bottom of this reservoir, there is a pigtail about 10 inches long with a white plug on it, I cannot for the life of me find the plug it connects to.

Unfortunately, I already have the hood and headlights back in so I would like to avoid taking it apart if I can at all help it. I am 90 percent sure the plug for it is in the bundle that comes out of the main harness by the master cylinder but this pigtail just seems too long.

Is there anyone on here that has a similar machine and could maybe send a pic of where this wire goes? It's the only white connector in the whole machine and just cannot find it.

Hi Everyone, New user here thought this is the best place to post.

Getting into the ATV world and thought I would start with a project. Picked up a 2021 Zforce 1000, which Came from an insurance auction. The front end is smashed up pretty well but seems limited to the front 1/3 of the frame. Thinking I may just do a transplant if I can find a frame.

Maybe anyone here could help me out if you know of any frames from donor machines (maybe just the front half of a frame?) I may be able to purchase it. Let me know what you have and where you are located to see if we can work out something.