Where is the ECU located on my 2017 Zforce 800? Is it mounted under some plastic?

ok great. I will try this tomorrow after work. Thanks for the help.

Yea I know the kill switch works. I can shut it off while running and nothing works if the switch is flipped while turning the key. I have replaced the plugs. Took the gas cap off in case the tank vent was plugged. The fuel pump works fine. Took the battery out and charged it on a trickle charger and cleaned all the cables-even tho everything read 12+ volts on my meter. I have driven this thing thru puddles before so getting rained on was not the only time I got it wet. Plus I wash it after every weekend trip. Thanks for the reply-keep throwing ideas at me. I'd like to try as much as I can before I have to give in and take it to the dealer. It runs fine as long as you keep some throttle in it. I just won't idle any longer.

I have a 2017 ZForce 800 Trail. Last weekend while trail riding, my ZForce had gotten rained on during the night-heavy rain too. The next day when we went to go riding, it will start but only if I give it some gas pedal. It will run fine as long as i give it some gas. There is no idle at all. Went thru the system check and the codes say low voltage to the TPS sensor. It has 4.8 vdc. Manual says it should be 5.0 vdc. I have checked everything I can think of-drained the gas, pulled all the connections apart and let it sit out in the sun-changed the fuel filter behind the air box-cleaned the filter. Tapped on the fuel pump. Any help on this would really be appreciated.