Hello all. New to the Forum and looking for help.
First the machine runs and perform perfect.
So, I want to add whips to the machine and want to use the AUX 1 light button. I plugged in the prewired bus bar, not sure if it needed to be for the aux light buttons but why not if I want to add more accessories later. So I located the light aux 1 plug by the winch. When testing this plug there is no power. There are fuses and relays under the hood for both aux buttons and I took the fuse out and tested there and still no power.
Very confused. I will mess around with it this weekend but did call the dealer and going to bring it to them next week if I have no luck this weekend.
Any ideas?

I am with you. I recently bought a 2024 cforce 800 touring and knew they do have the center front or center rear lights hooked up like the 1000 does. But both center lights have wires to a bung. So am currently exploring how to hook them up. So am assuming cfmoto did not wire these lights up to make it an added feature on the 1000. On the 800 the lights are there and have the wiring for both but it is just to an empty connection. For example (looking at the machine from the front) the rear empty socket for the rear is on the left, its a green & brown wire bung. I am assuming the front has a similar bung with no wires hooked up. So over xmas break I am going to cut the bung off of both and wires on the rear and front to an accessory 12V spot. Or splice them into the rear and front running light wires. Will give an update.