Late reply.  Thanks for the info and tips.  Was back out elk hunting and really didn't have much time to look at it.  I found all the fuses.  No issues there.  Cleaned the mass air flow sensor (with MAF cleaner).  It didn't look dirty or oily.  Pulled the plugs.  They looked fine.  Still will not start.  It's still on the trailer so I'll run it down to the CF Moto dealer in the area.  They're about 60 miles away.  Hope to get it back before the snow flies so I can hook up the plow.

Howdy all,  CFMoto newbie here. 

Bought the 2017 800 trail a few months ago and drove it 150 or so miles with no issues.  Changed the oil and got a uni-filter first thing.
had about 1000 miles on it when purchases. 

Was using it this past week on an elk hunt.  Ran great for the first two days then started running rough inconsistently.  Would run fine for a bit then lose power, then would die, and would be hard to restart.  After several attempts to restart it would finally stumble and start but would then run inconsistently, sometime good and sometimes rough til finally it died and would no longer restart.  It does have a code P0174 (lean condition) which could be any number of things.  I was driving at 8,500 to 9,500 feet so if anything it should be running rich.  I did clean the uni-filter and re-oil the foam.  The fuel pump seems to be working as it should but I have no way to check pressure.  Any thoughts on where to start? I'm thinking it some kind of electrical gremlin due to the sudden and inconsistent symptoms. 

Secondly, where's the fuse panel on this model?  I did find a couple relays under the driver's seat and what appears to be the ECU in front of the dash but no other fuse panels that I can see under the dash (I did remove the panel under the switches and display) , under the front package compartment, or in the engine bay. 

Any help is much appreciated. 

Thanks
Rojo