« previous next »
Pages: [1]   Go Down

0 Members and 1 Guest are viewing this topic.

*

Offline VomHaus73

UForce 1000
« on: June 24, 2021, 08:38:08 AM »
I am new to the CFMoto world. I am from Mississippi just purchased a UForce 1000 in blue. Just looking to learn more about the units, do's and don'ts etc ...... I have added 30" tires is the only modification at the moment.
Logged
*

Offline NMKawierider

Re: UForce 1000
« Reply #1 on: June 24, 2021, 09:15:07 AM »
Welcome. As is with all CFM units, get that OE air filter replaced with the Unifilter before delivery if possible, definitely before any dusty rides. Then as with all CFM's, check every nut, bolt and screw for proper torque. Especially all suspension, steering and component mount. Check for missing cotter pins on all castle nuts as well. 
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline VomHaus73

Re: UForce 1000
« Reply #2 on: June 24, 2021, 08:11:07 PM »
Quote from: NMKawierider on June 24, 2021, 09:15:07 AM
Welcome. As is with all CFM units, get that OE air filter replaced with the Unifilter before delivery if possible, definitely before any dusty rides. Then as with all CFM's, check every nut, bolt and screw for proper torque. Especially all suspension, steering and component mount. Check for missing cotter pins on all castle nuts as well.

Thanks for the tips
Logged
*

Offline Mogleybear

Re: UForce 1000
« Reply #3 on: June 24, 2021, 10:43:05 PM »
Welcome to the forum. Congrats on the new machine. 
Logged
2019 Cforce 800XC
*

Offline Arizona Bushman

Re: UForce 1000
« Reply #4 on: July 02, 2021, 08:36:32 PM »
Quote from: NMKawierider on June 24, 2021, 09:15:07 AM
check every nut, bolt and screw for proper torque. Especially all suspension, steering and component mount. Check for missing cotter pins on all castle nuts as well.

I very much agree, every nut and bolt. Experience here.
Logged
Had a 2017 Zforce 800EX, traded to a 2020 Uforce 800
Pages: [1]   Go Up
« previous next »