Newbie Cforce 1000 overland

Started by Brower1000, July 07, 2022, 01:26:52 PM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic

Brower1000

**
Junior Member
Posts: 1
Logged
Brower1000
Junior MemberPosts: 1
Coming from 2015 Polaris SP Hunter edition good machine but Voltage regulator would easily over heat main issue. Cforce no major complaints but two minor ones. First coming down steep inclines no engine breaking trans will disengage and machine free spin. I either ride breaks or if I can apply little throttle it will engage trans ?? Secondly no reverse back up lights really stinks obliviously at night !! Any members have info on these issues please share !! Thx

Mogleybear

*****
Guru
Posts: 945
Logged
Mogleybear
GuruPosts: 945
Welcome to the forum.  Congrats on the machine.  I have had that issue with every machine I have owned with the engine braking, it will eventually free wheel unless you bump the throttle.  I just learned to do that.  My Polaris had "work lights" that faced the rear but I seldom remembered to turn them on in reverse at night.  My RZR I installed a set of LED lights for that purpose, but it was much more difficult to reverse the RZR at night without them. 
2019 Cforce 800XC