0 Members and 1 Guest are viewing this topic.

*

Offline Kanto

New 520 cf-moto
« on: July 10, 2022, 02:55:57 PM »
I got my new cforce 520 from the dealer last week. Sold my old can-am outlander 400 which had too many issues.


I have already made some little mods to it.
- 1" wheel spacers in the front
- Replaced the winch cable whit rope and aluminium fairlead.
- Removed all the ugly warning stickert
- Ledbar (not in this picture)
- Plastic skid plate

Mods in the future
- 27" tires
- Lift kit / turning the knuckles at the back.
- Bigger exthaust tip
« Last Edit: July 21, 2022, 01:47:41 AM by Kanto »

*

Offline NMKawierider

Re: New 520 cf-moto
« Reply #1 on: July 10, 2022, 03:39:45 PM »
Welcome. Congrats. Don't forget to upgrade that air cleaner to a UniFilter...before the dust does too much damage to that new engine. :)

2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline Kanto

Re: New 520 cf-moto
« Reply #2 on: July 11, 2022, 01:07:41 AM »
Thanks. Is the stock air filter really that bad?

*

Offline NMKawierider

Re: New 520 cf-moto
« Reply #3 on: July 11, 2022, 07:22:40 AM »
Thanks. Is the stock air filter really that bad?
Yes. Trust no CFM air filter.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline Mogleybear

Re: New 520 cf-moto
« Reply #4 on: July 17, 2022, 03:13:27 PM »
Welcome to the forum.  Congrats on the new machine!
2019 Cforce 800XC

*

Offline Kanto

Re: New 520 cf-moto
« Reply #5 on: July 21, 2022, 01:46:40 AM »
Thank you. I just installed my new Iron Baltic skid plate set.