CFmoto Cforce electrical issues

Started by harry_x1, July 07, 2025, 02:10:28 PM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic

harry_x1

**
Junior Member
Posts: 2
Logged
harry_x1
Junior MemberPosts: 2
Hi - I have a Cforce which will not start after being inactive for 6 months. I get no power/lights in the meter. I replaced the battery, but still no luck. When I check some electrical connections close to the battery, I see there are two fuses for 50 amp. On removing those fuses, I see that one of the connectors only has one male receptacle. Is that normal, or is the connector damaged? What are places should I check to make sure power is running right. thanks

NMKawierider

Global Moderator
*****
Guru
Posts: 12,594
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,594
It would be pointless to put a fuse in something with only one terminal unless one was just a spare and the one connector was used to hold it in place. Let's see the connection end of both fuses and look close to see if there was ever another terminal. Test your key switch as well.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

harry_x1

**
Junior Member
Posts: 2
Logged
harry_x1
Junior MemberPosts: 2
Quote from: NMKawierider on July 07, 2025, 03:15:57 PM
It would be pointless to put a fuse in something with only one terminal unless one was just a spare and the one connector was used to hold it in place. Let's see the connection end of both fuses and look close to see if there was ever another terminal. Test your key switch as well.

Thanks for responding. I could not locate the missing terminal but will take another look when I am back with the vehicle tommorrow. How do I test my key switch? is there any education/video on same that you can guide me to? thanks again for all the assistance on this