0 Members and 1 Guest are viewing this topic.

*

Offline glenlivet

Air impact
« on: March 30, 2018, 10:43:56 AM »
Haddy like this bad boy, Clark?  ;D Thanks for the tip.


« Last Edit: September 13, 2021, 03:21:12 PM by NMKawierider »
For a nation to believe it can tax itself into prosperity is like a man standing in a bucket and believing he can raise himself by pulling on the handle - Winston Churchill

*

Offline NMKawierider

Re: Air impact
« Reply #1 on: March 30, 2018, 11:48:55 AM »
LOL..yeah..it's a stud-breaker on max..be careful. If you really want some power out of it, go up a size on the line with the fittings...and crank the compressor up to 150psi. It's ..."scary".....lol. That's what it took to get my secondary nut off.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline Hrc630

Re: Air impact
« Reply #2 on: April 06, 2018, 07:25:28 PM »
Try the lithium ion Milwaukee Fuel
Série....
ZForce 800 53" 2015
Wet Clutch delete
CVTech Trail block
Two Brothers exhaust
Power Commander 5 with Autotune
Honda TRX450r front shocks
ELKA Stage 5 rear shocks
Custom doors
Mud fender
3" wheels spacer

*

Offline Dutchtrekker

Re: Air impact
« Reply #3 on: April 07, 2018, 03:36:26 AM »
These air-guns are beautiful........but I don't like them. I sah to much damage with these things in unskilled hands.
Something stuck............o just put air on it. Wenn its broken they come to me to fix it. There are people who even use air vor every bolt and nut.
They are nutz. With decent tools and a good Nm tool you can fix everything. But that is just my opinion.
Gr. Cees.

CFM U800 with 4406 km.

*

Offline glenlivet

Re: Air impact
« Reply #4 on: April 07, 2018, 04:46:32 PM »
I hear ya. Wrenching on things successfully takes a certain feel for what you are doing. I have a buddy who got an electric impact and he doesn't seem to even think about what size bolt he's working on, he just hammers away on any of them just the same. I cringe.
For a nation to believe it can tax itself into prosperity is like a man standing in a bucket and believing he can raise himself by pulling on the handle - Winston Churchill

*

Offline ctdls

Re: Air impact
« Reply #5 on: April 08, 2018, 08:20:30 AM »
glenlivet, have you tried to find a Cdn supplier for these products? Looks interesting, lifetime wtty on drill bits   :)

I'm shopping for 1/2 impact right with enough punch & small enough to get into the driven clutch area. Snap On has a deal on one right, nearly 1200ftlbs break away torque......still big money :(

There is a couple of other nuts when doing a engine tear down that are tight like the driven. It's a chore to hold some these things, so the big impact would be nice.

I use a lot of cordless tools, most have limited power so as to not hurt anything. Some even have an adjustable clutch which is really nice when working with plastic panels or the multitude 6mm holding crankcases together.
ZF 800 LX Trail, stock for now.......not for long.

*

Offline glenlivet

Re: Air impact
« Reply #6 on: April 08, 2018, 11:55:50 AM »
Got it on eBay for 85 USD on the advice of NMKawierider
https://www.ebay.com/itm/Drill-Hog-1-2-Air-Impact-Wrench-Air-Tool-Composite-1000-FT-LBS-Lifetime-Warranty/182600208214?hash=item2a83d20f56:g:-hcAAOSwstxVeSCB
It's handy for me because I can have things sent to a shipping receiver's address in Sumas Wa. and just hop across the border at Abbotsford and claim it for 3 dollars handling. Most times if I have under $200 to declare they just wave me through at the CDN side.
For a nation to believe it can tax itself into prosperity is like a man standing in a bucket and believing he can raise himself by pulling on the handle - Winston Churchill

*

Offline dragonmac

Re: Air impact
« Reply #7 on: April 10, 2018, 02:36:14 PM »
Glen, I bought the same one three months ago because of a two thumbs up from NMK....great tool and very light compared to most powerful impacts !! Use it everyday in my shop. (quick shipping also)
2012 zforce 600 snyper
Kaw 650 v-twin atv
Honda 450 foreman es
Javelin 130 hp Bass
24' Grumann Pontoon