1

UForce 1000 / UFORCE DELUXE SELF-CANCELING TURN SIGNAL KIT

« on: April 18, 2024, 04:12:08 PM »

UFORCE DELUXE SELF-CANCELING TURN SIGNAL KIT

Link:  https://www.superatv.com/cfmoto-uforce-deluxe-self-canceling-turn-signal-kit

• Turns off automatically thanks to our BlinkTek Technology
  Connects to and controls OEM taillights and dash indicator
  Compatible with LED side mirrors, light bars, whip lights, and other lighting accessories
  IP67-rated connectors
  Includes a switch-operated 105 dB horn
  Functions as turn signals and hazard lights
  4 times brighter than our previous turn signal kit
  Plug and play
  Utilizes OEM harness and connectors

CFMOTO UForce Self-Canceling Turn Signals
The CFMOTO UForce is awesome on solo rides, but when you need to signal a turn to your buddies, you’re stuck with your arm out the window. Get SuperATV’s CFMOTO UForce Deluxe Self-Canceling Turn Signal Kit. It turns off automatically, similar to an automotive turn signal!
Auto-cancel turn signal kit
Connects to OEM taillights
Includes hazard lights and horn
Water resistant—IP67

Turns Off Automatically
Whether you’re in your car or your UForce, there’s nothing more annoying than leaving your turn signal on. And it’s confusing! With our auto-cancel turn signal kit, you won’t have to worry about manually turning off your blinkers. It has a long or short duration, depending on how long you press the dash-mounted switch.

Uses BlinkTek to Sync Your Accessories
Our BlinkTek Technology syncs the dash indicator, rear taillights, turn signals, and other connected lighted accessories with your turn signals. Just use the included splice kit and we’ll make sure all your lights blink together.

Uses Your UForce’s OEM Taillights
This kit includes four amber LED lights for the front. That’s two for each front corner so you’re visible from all angles. They connect directly to your UForce’s rear taillights to turn them into turn signals—no extra lights needed.

Hazard Light and Horn Included
We’ve made these turn signals easy to operate with a pair of dash-mounted rocker switches. One switch controls your turn signals and the other controls your brand-new horn and hazard light mode. Both switches are backlit so they’re easy to see in the dark.

Water-Resistant and Easy to Install
Your UForce deserves top-quality upgrades that won’t give up. That’s why we’ve made our turn signal kit water- and dust-resistant with IP67-rated components. No mud, water, sand, or dirt will destroy our turn signal kit. And installing it is as painless as possible thanks to our color-coded wiring.

Kit Includes:
(4) 3/4” amber LED indicator lights
Horn
Hazard light/horn rocker switch
Turn signal rocker switch
Dash indicator harness
Auto-cancel control unit
All required hardware and wiring
Splice kit

2

UForce 1000 XLS / UFORCE DELUXE SELF-CANCELING TURN SIGNAL KIT

« on: April 18, 2024, 04:11:32 PM »

UFORCE DELUXE SELF-CANCELING TURN SIGNAL KIT

Link:  https://www.superatv.com/cfmoto-uforce-deluxe-self-canceling-turn-signal-kit

• Turns off automatically thanks to our BlinkTek Technology
  Connects to and controls OEM taillights and dash indicator
  Compatible with LED side mirrors, light bars, whip lights, and other lighting accessories
  IP67-rated connectors
  Includes a switch-operated 105 dB horn
  Functions as turn signals and hazard lights
  4 times brighter than our previous turn signal kit
  Plug and play
  Utilizes OEM harness and connectors

CFMOTO UForce Self-Canceling Turn Signals
The CFMOTO UForce is awesome on solo rides, but when you need to signal a turn to your buddies, you’re stuck with your arm out the window. Get SuperATV’s CFMOTO UForce Deluxe Self-Canceling Turn Signal Kit. It turns off automatically, similar to an automotive turn signal!
Auto-cancel turn signal kit
Connects to OEM taillights
Includes hazard lights and horn
Water resistant—IP67

Turns Off Automatically
Whether you’re in your car or your UForce, there’s nothing more annoying than leaving your turn signal on. And it’s confusing! With our auto-cancel turn signal kit, you won’t have to worry about manually turning off your blinkers. It has a long or short duration, depending on how long you press the dash-mounted switch.

Uses BlinkTek to Sync Your Accessories
Our BlinkTek Technology syncs the dash indicator, rear taillights, turn signals, and other connected lighted accessories with your turn signals. Just use the included splice kit and we’ll make sure all your lights blink together.

Uses Your UForce’s OEM Taillights
This kit includes four amber LED lights for the front. That’s two for each front corner so you’re visible from all angles. They connect directly to your UForce’s rear taillights to turn them into turn signals—no extra lights needed.

Hazard Light and Horn Included
We’ve made these turn signals easy to operate with a pair of dash-mounted rocker switches. One switch controls your turn signals and the other controls your brand-new horn and hazard light mode. Both switches are backlit so they’re easy to see in the dark.

Water-Resistant and Easy to Install
Your UForce deserves top-quality upgrades that won’t give up. That’s why we’ve made our turn signal kit water- and dust-resistant with IP67-rated components. No mud, water, sand, or dirt will destroy our turn signal kit. And installing it is as painless as possible thanks to our color-coded wiring.

Kit Includes:
(4) 3/4” amber LED indicator lights
Horn
Hazard light/horn rocker switch
Turn signal rocker switch
Dash indicator harness
Auto-cancel control unit
All required hardware and wiring
Splice kit

3

SuperATV / UFORCE DELUXE SELF-CANCELING TURN SIGNAL KIT

« on: April 18, 2024, 04:10:40 PM »

UFORCE DELUXE SELF-CANCELING TURN SIGNAL KIT

Link:  https://www.superatv.com/cfmoto-uforce-deluxe-self-canceling-turn-signal-kit

• Turns off automatically thanks to our BlinkTek Technology
  Connects to and controls OEM taillights and dash indicator
  Compatible with LED side mirrors, light bars, whip lights, and other lighting accessories
  IP67-rated connectors
  Includes a switch-operated 105 dB horn
  Functions as turn signals and hazard lights
  4 times brighter than our previous turn signal kit
  Plug and play
  Utilizes OEM harness and connectors

CFMOTO UForce Self-Canceling Turn Signals
The CFMOTO UForce is awesome on solo rides, but when you need to signal a turn to your buddies, you’re stuck with your arm out the window. Get SuperATV’s CFMOTO UForce Deluxe Self-Canceling Turn Signal Kit. It turns off automatically, similar to an automotive turn signal!
Auto-cancel turn signal kit
Connects to OEM taillights
Includes hazard lights and horn
Water resistant—IP67

Turns Off Automatically
Whether you’re in your car or your UForce, there’s nothing more annoying than leaving your turn signal on. And it’s confusing! With our auto-cancel turn signal kit, you won’t have to worry about manually turning off your blinkers. It has a long or short duration, depending on how long you press the dash-mounted switch.

Uses BlinkTek to Sync Your Accessories
Our BlinkTek Technology syncs the dash indicator, rear taillights, turn signals, and other connected lighted accessories with your turn signals. Just use the included splice kit and we’ll make sure all your lights blink together.

Uses Your UForce’s OEM Taillights
This kit includes four amber LED lights for the front. That’s two for each front corner so you’re visible from all angles. They connect directly to your UForce’s rear taillights to turn them into turn signals—no extra lights needed.

Hazard Light and Horn Included
We’ve made these turn signals easy to operate with a pair of dash-mounted rocker switches. One switch controls your turn signals and the other controls your brand-new horn and hazard light mode. Both switches are backlit so they’re easy to see in the dark.

Water-Resistant and Easy to Install
Your UForce deserves top-quality upgrades that won’t give up. That’s why we’ve made our turn signal kit water- and dust-resistant with IP67-rated components. No mud, water, sand, or dirt will destroy our turn signal kit. And installing it is as painless as possible thanks to our color-coded wiring.

Kit Includes:
(4) 3/4” amber LED indicator lights
Horn
Hazard light/horn rocker switch
Turn signal rocker switch
Dash indicator harness
Auto-cancel control unit
All required hardware and wiring
Splice kit

4

SuperATV / UFORCE 1000 LOW-PROFILE FENDER FLARES

« on: April 18, 2024, 04:06:09 PM »

UFORCE 1000 LOW-PROFILE FENDER FLARES

Link:  https://www.superatv.com/cfmoto-uforce-1000-low-profile-fender-flares

Extends out 4 inches from the body
Protects against rocks, dirt, sand, and other debris
Made of extremely durable LDPE
Comes with full-color instructions and all necessary hardware for easy installation







Conquer Mud with CFMOTO Fender Flares
Embrace every muddy adventure, from small puddles to deep bogs, with SuperATV’s CFMOTO UForce 1000Low-Profile Fender Flares. These flares extend 4 inches from your vehicle's body, providing optimal protection against trail debris and mud kicked up from your tires. With these rugged fender flares, you can roll through any muddy terrain without fear. Plus, they work with your dump bed and add a seriously badass look to your machine.
Adds 4” of protection on each side
Made from insanely durable LDPE
Matches your machine’s contours perfectly

Built with Durable LDPE
For maximum strength, we built these fender flares with 1/8” LDPE. It’s flexible and strong, making it nearly uncrackable. And these flares are mounted with matching push pins for easy install and a smooth finish.

Familiar Look, Cool Style
Our fender flares are made to match your UTV's style perfectly but with a fun surprise. They're bigger and tougher, making heads turn when you hit the trail.

5

UForce 1000 / UFORCE 1000 LOW-PROFILE FENDER FLARES

« on: April 18, 2024, 04:05:49 PM »

UFORCE 1000 LOW-PROFILE FENDER FLARES

Link:  https://www.superatv.com/cfmoto-uforce-1000-low-profile-fender-flares

Extends out 4 inches from the body
Protects against rocks, dirt, sand, and other debris
Made of extremely durable LDPE
Comes with full-color instructions and all necessary hardware for easy installation







Conquer Mud with CFMOTO Fender Flares
Embrace every muddy adventure, from small puddles to deep bogs, with SuperATV’s CFMOTO UForce 1000Low-Profile Fender Flares. These flares extend 4 inches from your vehicle's body, providing optimal protection against trail debris and mud kicked up from your tires. With these rugged fender flares, you can roll through any muddy terrain without fear. Plus, they work with your dump bed and add a seriously badass look to your machine.
Adds 4” of protection on each side
Made from insanely durable LDPE
Matches your machine’s contours perfectly

Built with Durable LDPE
For maximum strength, we built these fender flares with 1/8” LDPE. It’s flexible and strong, making it nearly uncrackable. And these flares are mounted with matching push pins for easy install and a smooth finish.

Familiar Look, Cool Style
Our fender flares are made to match your UTV's style perfectly but with a fun surprise. They're bigger and tougher, making heads turn when you hit the trail.

6

UForce 1000 XLS / UFORCE 1000 LOW-PROFILE FENDER FLARES

« on: April 18, 2024, 04:04:48 PM »

UFORCE 1000 LOW-PROFILE FENDER FLARES

Link:  https://www.superatv.com/cfmoto-uforce-1000-low-profile-fender-flares

Extends out 4 inches from the body
Protects against rocks, dirt, sand, and other debris
Made of extremely durable LDPE
Comes with full-color instructions and all necessary hardware for easy installation







Conquer Mud with CFMOTO Fender Flares
Embrace every muddy adventure, from small puddles to deep bogs, with SuperATV’s CFMOTO UForce 1000Low-Profile Fender Flares. These flares extend 4 inches from your vehicle's body, providing optimal protection against trail debris and mud kicked up from your tires. With these rugged fender flares, you can roll through any muddy terrain without fear. Plus, they work with your dump bed and add a seriously badass look to your machine.
Adds 4” of protection on each side
Made from insanely durable LDPE
Matches your machine’s contours perfectly

Built with Durable LDPE
For maximum strength, we built these fender flares with 1/8” LDPE. It’s flexible and strong, making it nearly uncrackable. And these flares are mounted with matching push pins for easy install and a smooth finish.

Familiar Look, Cool Style
Our fender flares are made to match your UTV's style perfectly but with a fun surprise. They're bigger and tougher, making heads turn when you hit the trail.

7

SuperATV / 4" and 6" Portal Lifts for the UForce 1000

« on: April 18, 2024, 04:01:01 PM »

UFORCE 1000 6" PORTAL GEAR LIFT

Link: 
4" Portals:  https://www.superatv.com/cfmoto-uforce-1000-4-inch-portal-gear-lift
6" Portals:  https://www.superatv.com/cfmoto-uforce-1000-6-inch-portal-gear-lift

Available with billet or cast aluminum housing
Cool, quiet, precision-ground gears made from 9310 alloy billet steel
Increases width by 4” per side (8” total)
1.5” diameter 4340 hardened steel drive shaft
Housings use gaskets or O-rings that don’t let anything through
Universal hub fits all major bolt patterns
Gear reduction reduces stress on your drivetrain






CFMOTO UForce 1000 Portals for Ultimate Performance
Prove your CFMOTO is worth the hype with SuperATV’s CFMOTO UForce 1000 6” Portal Gear Lift. It maximizes your side-by-side’s performance with an all-in-one gear reduction and 6” lift. You can choose a billet or cast aluminum housing and 15% or 30% gear reduction. Whether you’re taking on muddy creeks or rocky climbs, GDP Portals will make it easier.
Gives you a 6” lift and a gear reduction in one package
Choose a 30% or 45% gear reduction
Maintains OEM suspension angles

The Gear Reduction You Need
Match your gear reduction to the way you ride for optimal power and speed. A 30% gear reduction improves torque without sacrificing your machine’s top speed. If you want to dominate the mud hole or creep over rocks, choose a 45% reduction.

Puts the Reduction in the Hub—Not the Transmission
GDP Portals move the gear reduction to the wheel hub instead of the transmission. This protects your axles, differential, prop shaft, and tranny from unneeded wear—and saves your wallet from costly repairs. These CFMOTO UForce portals preserve your factory suspension geometry, keeping your CV joints cool. Your machine’s most expensive parts are protected with GDP Portals.

Learn more about how tire size and gear reduction can unleash your machine’s potential.

Steel Alloy Gears
We use precision-ground 9310 billet steel alloy gears in our CFMOTO UForce portals. The durable steel construction can withstand all types of abuse. Our gears are designed to stay cool and run quietly even when you’re stomping on the gas.

GDP Portals Are Tough
These CFMOTO UForce 1000 portals are designed for hard rides. We use 5/16” steel alloy backing plates and durable aluminum housings to withstand any type of abuse.
Our housings are reinforced for gear retention and optimized for oil flow
Advanced steel alloy backing plates are stronger than chromoly
Enhance with Portal Blood—gear oil formulated for GDP Portals
There are no gimmicks and no vents because vents do more harm than good—we know because we tested them

Advanced Gaskets, Seals, and Bearings
Our portals use:
Advanced gaskets and O-rings with excellent oil resistance and low deterioration rates
A sealed input gear and double-lipped output seal
100% sealing coverage throughout so you can forget about oil leaks
Double-angular contact output bearings to prevent premature wear
Roller idler and drive bearings to maintain perfect gear meshing

Top-Rated Customer Service
Still need a little help getting exactly what you need? No worries—we’ve got a dedicated team just for portal support. Give us a call so we can get the perfect set of portals in your hands today.

CFMOTO UForce 1000 4” Portal Gear Lift Includes:
(4) Assembled portal hub complete with 9310 gears, seals, output shaft, advanced gaskets, and thrust bearings
(4) Universal hubs and precision-ground stainless steel slotted rotors with lugs
(4) Specialized steel alloy backing plates
(4) Steel caliper mounting plates
(4) Caliper adapter plates
(2) Rear hub adapters
(2) Steel steering arms
Extended brake lines
All required hardware, including recessed castle nut socket

8

UForce 1000 / 4" and 6" Portal Lifts for the UForce 1000

« on: April 18, 2024, 12:34:58 PM »

UFORCE 1000 6" PORTAL GEAR LIFT

Link: 
4" Portals:  https://www.superatv.com/cfmoto-uforce-1000-4-inch-portal-gear-lift
6" Portals:  https://www.superatv.com/cfmoto-uforce-1000-6-inch-portal-gear-lift

Available with billet or cast aluminum housing
Cool, quiet, precision-ground gears made from 9310 alloy billet steel
Increases width by 4” per side (8” total)
1.5” diameter 4340 hardened steel drive shaft
Housings use gaskets or O-rings that don’t let anything through
Universal hub fits all major bolt patterns
Gear reduction reduces stress on your drivetrain






CFMOTO UForce 1000 Portals for Ultimate Performance
Prove your CFMOTO is worth the hype with SuperATV’s CFMOTO UForce 1000 6” Portal Gear Lift. It maximizes your side-by-side’s performance with an all-in-one gear reduction and 6” lift. You can choose a billet or cast aluminum housing and 15% or 30% gear reduction. Whether you’re taking on muddy creeks or rocky climbs, GDP Portals will make it easier.
Gives you a 6” lift and a gear reduction in one package
Choose a 30% or 45% gear reduction
Maintains OEM suspension angles

The Gear Reduction You Need
Match your gear reduction to the way you ride for optimal power and speed. A 30% gear reduction improves torque without sacrificing your machine’s top speed. If you want to dominate the mud hole or creep over rocks, choose a 45% reduction.

Puts the Reduction in the Hub—Not the Transmission
GDP Portals move the gear reduction to the wheel hub instead of the transmission. This protects your axles, differential, prop shaft, and tranny from unneeded wear—and saves your wallet from costly repairs. These CFMOTO UForce portals preserve your factory suspension geometry, keeping your CV joints cool. Your machine’s most expensive parts are protected with GDP Portals.

Learn more about how tire size and gear reduction can unleash your machine’s potential.

Steel Alloy Gears
We use precision-ground 9310 billet steel alloy gears in our CFMOTO UForce portals. The durable steel construction can withstand all types of abuse. Our gears are designed to stay cool and run quietly even when you’re stomping on the gas.

GDP Portals Are Tough
These CFMOTO UForce 1000 portals are designed for hard rides. We use 5/16” steel alloy backing plates and durable aluminum housings to withstand any type of abuse.
Our housings are reinforced for gear retention and optimized for oil flow
Advanced steel alloy backing plates are stronger than chromoly
Enhance with Portal Blood—gear oil formulated for GDP Portals
There are no gimmicks and no vents because vents do more harm than good—we know because we tested them

Advanced Gaskets, Seals, and Bearings
Our portals use:
Advanced gaskets and O-rings with excellent oil resistance and low deterioration rates
A sealed input gear and double-lipped output seal
100% sealing coverage throughout so you can forget about oil leaks
Double-angular contact output bearings to prevent premature wear
Roller idler and drive bearings to maintain perfect gear meshing

Top-Rated Customer Service
Still need a little help getting exactly what you need? No worries—we’ve got a dedicated team just for portal support. Give us a call so we can get the perfect set of portals in your hands today.

CFMOTO UForce 1000 4” Portal Gear Lift Includes:
(4) Assembled portal hub complete with 9310 gears, seals, output shaft, advanced gaskets, and thrust bearings
(4) Universal hubs and precision-ground stainless steel slotted rotors with lugs
(4) Specialized steel alloy backing plates
(4) Steel caliper mounting plates
(4) Caliper adapter plates
(2) Rear hub adapters
(2) Steel steering arms
Extended brake lines
All required hardware, including recessed castle nut socket

9

UForce 1000 XLS / 4" and 6" Portal Lifts for the UForce 1000

« on: April 18, 2024, 12:33:45 PM »

UFORCE 1000 6" PORTAL GEAR LIFT

Link: 
4" Portals:  https://www.superatv.com/cfmoto-uforce-1000-4-inch-portal-gear-lift
6" Portals:  https://www.superatv.com/cfmoto-uforce-1000-6-inch-portal-gear-lift

Available with billet or cast aluminum housing
Cool, quiet, precision-ground gears made from 9310 alloy billet steel
Increases width by 4” per side (8” total)
1.5” diameter 4340 hardened steel drive shaft
Housings use gaskets or O-rings that don’t let anything through
Universal hub fits all major bolt patterns
Gear reduction reduces stress on your drivetrain






CFMOTO UForce 1000 Portals for Ultimate Performance
Prove your CFMOTO is worth the hype with SuperATV’s CFMOTO UForce 1000 6” Portal Gear Lift. It maximizes your side-by-side’s performance with an all-in-one gear reduction and 6” lift. You can choose a billet or cast aluminum housing and 15% or 30% gear reduction. Whether you’re taking on muddy creeks or rocky climbs, GDP Portals will make it easier.
Gives you a 6” lift and a gear reduction in one package
Choose a 30% or 45% gear reduction
Maintains OEM suspension angles

The Gear Reduction You Need
Match your gear reduction to the way you ride for optimal power and speed. A 30% gear reduction improves torque without sacrificing your machine’s top speed. If you want to dominate the mud hole or creep over rocks, choose a 45% reduction.

Puts the Reduction in the Hub—Not the Transmission
GDP Portals move the gear reduction to the wheel hub instead of the transmission. This protects your axles, differential, prop shaft, and tranny from unneeded wear—and saves your wallet from costly repairs. These CFMOTO UForce portals preserve your factory suspension geometry, keeping your CV joints cool. Your machine’s most expensive parts are protected with GDP Portals.

Learn more about how tire size and gear reduction can unleash your machine’s potential.

Steel Alloy Gears
We use precision-ground 9310 billet steel alloy gears in our CFMOTO UForce portals. The durable steel construction can withstand all types of abuse. Our gears are designed to stay cool and run quietly even when you’re stomping on the gas.

GDP Portals Are Tough
These CFMOTO UForce 1000 portals are designed for hard rides. We use 5/16” steel alloy backing plates and durable aluminum housings to withstand any type of abuse.
Our housings are reinforced for gear retention and optimized for oil flow
Advanced steel alloy backing plates are stronger than chromoly
Enhance with Portal Blood—gear oil formulated for GDP Portals
There are no gimmicks and no vents because vents do more harm than good—we know because we tested them

Advanced Gaskets, Seals, and Bearings
Our portals use:
Advanced gaskets and O-rings with excellent oil resistance and low deterioration rates
A sealed input gear and double-lipped output seal
100% sealing coverage throughout so you can forget about oil leaks
Double-angular contact output bearings to prevent premature wear
Roller idler and drive bearings to maintain perfect gear meshing

Top-Rated Customer Service
Still need a little help getting exactly what you need? No worries—we’ve got a dedicated team just for portal support. Give us a call so we can get the perfect set of portals in your hands today.

CFMOTO UForce 1000 4” Portal Gear Lift Includes:
(4) Assembled portal hub complete with 9310 gears, seals, output shaft, advanced gaskets, and thrust bearings
(4) Universal hubs and precision-ground stainless steel slotted rotors with lugs
(4) Specialized steel alloy backing plates
(4) Steel caliper mounting plates
(4) Caliper adapter plates
(2) Rear hub adapters
(2) Steel steering arms
Extended brake lines
All required hardware, including recessed castle nut socket

10

ZForce 950/1000 Sport & EX / What's different about this 950? Something new from SuperATV...

« on: April 03, 2024, 01:56:16 PM »

Hmmm...



Coming this summer....

11

SuperATV / UFORCE 1000 XL ALUMINUM DOORS

« on: February 02, 2024, 01:00:07 PM »

UFORCE 1000 XL ALUMINUM DOORS

LINK:  https://www.superatv.com/cfmoto-uforce-1000-xl-aluminum-doors

FEATURES:
Ergonomic height for a comfortable ride
Multi-bend aluminum construction for style and weight savings
Heavy-duty steel frame with two mounting points for long-lasting performance
Pre-assembled for easy bolt-on installation
Gravity hinges enable quick removal
Powder coated for added durability






Stylish, Functional, Strong
Whether you’re just splashing down the driveway or racing along muddy trails, you and your passengers need protection from the elements. Get SuperATV’s Aluminum Doors for the CFMOTO UForce 1000 XL for improved comfort on all kinds of rides—and don’t forget their understated good looks. Our aluminum construction and steel frame can take whatever the trail throws at you.
Automotive-style interior door latches
Made with 1/8” aluminum plating and 1” steel tubing
Easy to install and remove

Unbeatable Protection
We designed these doors to work perfectly with your UForce. They’re tall enough to protect you from mud, rocks, and debris but short enough to be a comfortable armrest. And the brake press-bent contours give you extra leg room so you’re not knocking your knees around on every bump. Plus our automotive-style latches are easy to use from inside or outside the cab—even with gloves on. We even include aluminum filler panels for a sleek, gapless look.

Built to Be Tough
Our doors are made with a lightweight aluminum door skin and steel framing. The steel frame provides impressive strength and stability, while the aluminum keeps weight to a minimum. The beefed-up gravity hinges keep you from overextending the door and the included doorstops prevent them from collapsing inward. Plus the gravity hinges are easy to disengage and remove the doors quickly. Finally, they’re powder coated to resist rust and corrosion. Strong, good-looking, and durable—you won’t find better doors for your UForce 1000 XL.

12

UForce 1000 XLS / UFORCE 1000 XL ALUMINUM DOORS

« on: February 02, 2024, 12:59:15 PM »

UFORCE 1000 XL ALUMINUM DOORS

LINK:  https://www.superatv.com/cfmoto-uforce-1000-xl-aluminum-doors

FEATURES:
Ergonomic height for a comfortable ride
Multi-bend aluminum construction for style and weight savings
Heavy-duty steel frame with two mounting points for long-lasting performance
Pre-assembled for easy bolt-on installation
Gravity hinges enable quick removal
Powder coated for added durability






Stylish, Functional, Strong
Whether you’re just splashing down the driveway or racing along muddy trails, you and your passengers need protection from the elements. Get SuperATV’s Aluminum Doors for the CFMOTO UForce 1000 XL for improved comfort on all kinds of rides—and don’t forget their understated good looks. Our aluminum construction and steel frame can take whatever the trail throws at you.
Automotive-style interior door latches
Made with 1/8” aluminum plating and 1” steel tubing
Easy to install and remove

Unbeatable Protection
We designed these doors to work perfectly with your UForce. They’re tall enough to protect you from mud, rocks, and debris but short enough to be a comfortable armrest. And the brake press-bent contours give you extra leg room so you’re not knocking your knees around on every bump. Plus our automotive-style latches are easy to use from inside or outside the cab—even with gloves on. We even include aluminum filler panels for a sleek, gapless look.

Built to Be Tough
Our doors are made with a lightweight aluminum door skin and steel framing. The steel frame provides impressive strength and stability, while the aluminum keeps weight to a minimum. The beefed-up gravity hinges keep you from overextending the door and the included doorstops prevent them from collapsing inward. Plus the gravity hinges are easy to disengage and remove the doors quickly. Finally, they’re powder coated to resist rust and corrosion. Strong, good-looking, and durable—you won’t find better doors for your UForce 1000 XL.

13

UForce 1000 / U-Force Game Loader Rack

« on: January 05, 2024, 11:44:20 AM »

U-Force Game Loader Rack

Link:  https://www.superatv.com/cfmoto-uforce-1000-game-loader-rack

500-lb. winch
Durable synthetic rope
2 locations to mount cube lights
1.5” powder-coated steel tubing
Won’t interfere with dump bed





Get Hunt Ready
Your UForce is a decent hunting machine. But you can make it way better by installing SuperATV’s Game Loader Rack on your CFMOTO UForce 1000. It makes loading your big kill into the bed easy thanks to this rack and its 500-pound winch.
Equipped with a 500-pound winch
Steel construction for strength
Compatible with roofs, rear windshields, and more

A 500-Pound Winch Makes
The whole point of this rack is to give you a strategically placed 500-pound winch designed to make loading game easy. It uses a synthetic rope that’s super durable and can easily handle deer, bighorn sheep, and other mid-size game. This rack isn’t just for game though—it’s perfect moving logs, rocks, or bags of concrete too.

Steel Tubing for Strength
We built this rack to be as tough as possible. That’s why we make it with 1.5” diameter steel tubing. It’ll work hard without bending or breaking. Plus, it uses a UV-resistant powder coating for long-lasting protection from corrosion.

Easy Installation
Our UForce 1000 rack installs without any cutting or drilling. Instead, it uses ultra-strong brackets to give it the most secure fit possible. Plus, you get two locations to add cube lights for improved visibility during those early-morning or late-evening hunts.

Kit Includes
Rack
(4) Brackets
(4) Thread plates
500 lb. winch
Hand strap
Hook
Fairlead
Corded remote
All required hardware and wiring

14

UForce 1000 XLS / U-Force Game Loader Rack

« on: January 05, 2024, 11:43:55 AM »

U-Force Game Loader Rack

Fits 2022 XL model ONLY.  Fits all standard U-Force single row models 2022 and up. 

Link:  https://www.superatv.com/cfmoto-uforce-1000-game-loader-rack

500-lb. winch
Durable synthetic rope
2 locations to mount cube lights
1.5” powder-coated steel tubing
Won’t interfere with dump bed





Get Hunt Ready
Your UForce is a decent hunting machine. But you can make it way better by installing SuperATV’s Game Loader Rack on your CFMOTO UForce 1000. It makes loading your big kill into the bed easy thanks to this rack and its 500-pound winch.
Equipped with a 500-pound winch
Steel construction for strength
Compatible with roofs, rear windshields, and more

A 500-Pound Winch Makes
The whole point of this rack is to give you a strategically placed 500-pound winch designed to make loading game easy. It uses a synthetic rope that’s super durable and can easily handle deer, bighorn sheep, and other mid-size game. This rack isn’t just for game though—it’s perfect moving logs, rocks, or bags of concrete too.

Steel Tubing for Strength
We built this rack to be as tough as possible. That’s why we make it with 1.5” diameter steel tubing. It’ll work hard without bending or breaking. Plus, it uses a UV-resistant powder coating for long-lasting protection from corrosion.

Easy Installation
Our UForce 1000 rack installs without any cutting or drilling. Instead, it uses ultra-strong brackets to give it the most secure fit possible. Plus, you get two locations to add cube lights for improved visibility during those early-morning or late-evening hunts.

Kit Includes
Rack
(4) Brackets
(4) Thread plates
500 lb. winch
Hand strap
Hook
Fairlead
Corded remote
All required hardware and wiring

15

SuperATV / U-Force Game Loader Rack

« on: January 05, 2024, 11:43:20 AM »

U-Force Game Loader Rack

Link:  https://www.superatv.com/cfmoto-uforce-1000-game-loader-rack

500-lb. winch
Durable synthetic rope
2 locations to mount cube lights
1.5” powder-coated steel tubing
Won’t interfere with dump bed





Get Hunt Ready
Your UForce is a decent hunting machine. But you can make it way better by installing SuperATV’s Game Loader Rack on your CFMOTO UForce 1000. It makes loading your big kill into the bed easy thanks to this rack and its 500-pound winch.
Equipped with a 500-pound winch
Steel construction for strength
Compatible with roofs, rear windshields, and more

A 500-Pound Winch Makes
The whole point of this rack is to give you a strategically placed 500-pound winch designed to make loading game easy. It uses a synthetic rope that’s super durable and can easily handle deer, bighorn sheep, and other mid-size game. This rack isn’t just for game though—it’s perfect moving logs, rocks, or bags of concrete too.

Steel Tubing for Strength
We built this rack to be as tough as possible. That’s why we make it with 1.5” diameter steel tubing. It’ll work hard without bending or breaking. Plus, it uses a UV-resistant powder coating for long-lasting protection from corrosion.

Easy Installation
Our UForce 1000 rack installs without any cutting or drilling. Instead, it uses ultra-strong brackets to give it the most secure fit possible. Plus, you get two locations to add cube lights for improved visibility during those early-morning or late-evening hunts.

Kit Includes
Rack
(4) Brackets
(4) Thread plates
500 lb. winch
Hand strap
Hook
Fairlead
Corded remote
All required hardware and wiring