Once again im sorry that i didnt take pictures because it was 9pm when I finished and WAY to dark to take a picture but here is my write up and pictures to follow.

I bought a USB charger/ volt meter off of Amazon ( https://www.amazon.com/gp/product/B01CXZ04R8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 ) and installed it last night.  I REALLY liked the idea of this because pretty much everything I would be charging uses a USB cord and an adapter.  Plus I love the fact that is has a volt meter built in.  Installation is stupid simple.  Hook the + to a switched 12v source and the - to a good ground.  I have a secondary fuse block in my Zforce 800 so that's where I went with mine.  It seems like its a decent quality unit and it has 2 USB ports on it for charging.  On top of that it fits directly in the switch blank cut outs on the Zforce so no cutting required. If your looking for charging and a small gauge you wont find one cheaper or fitting more perfect than this one.

[2015 Z Force 800 53/Trail EPS]

Great idea. I have been using just a USB adaptor in the accessory plug but that renders the plug unusable for other stuff.

Another option

https://www.amazon.com/Cigarette-Voltmeter-Protection-Temperature-Fahrenheit/dp/B018I1FD8Q/ref=sr_1_1?s=wireless&ie=UTF8&qid=1472570920&sr=1-1&keywords=CAR+USB+Charger+and+voltmeter

Chudd, that's awesome. Wish I had an extra space for it.  Maybe I should take out the rev override.  Lol

[2015 Z Force 800 53/Trail EPS]

Chudd, that's awesome. Wish I had an extra space for it.  Maybe I should take out the rev override.  Lol

I'm out of space too now but there is plenty of room to cut new holes to the sides. I would make a template first but....

I had to cut a new hole for my light bar switch. I jut took one of the old blanks and traced it on there and cut it out.  Worked great

Here is one I put in the dry storage of my outlander.

Once again im sorry that i didnt take pictures because it was 9pm when I finished and WAY to dark to take a picture but here is my write up and pictures to follow.

Dammit chuddly, don't let it happen again!!! Turn on a light!  LOL. 
Just had to bust your chops.

[2015 Z Force 800 53/Trail EPS]

I had to cut a new hole for my light bar switch. I jut took one of the old blanks and traced it on there and cut it out.  Worked great

Freak'n-A   Glad I saved those blanks now!

Gfmoto-  I know...I'm just being lazy.  All week I have been leaving the house at 6am and havnt been home before 930pm every night.  LOL.  Just a busy time right now.  I plan to try to get some pictures of some stuff this weekend

NMKawirider - Simple solutions for simple minds like mine LOL

I guess i did snap a picture of the switches i put in (3 things in total) I put in the winch switch, the light bar switch, and the usb/volt meter

Lol, just bustin your chops.  But thanks for the pic,

Yeah I know LOL.  Nothing like a good ribbing 

Gfmoto-  I know...I'm just being lazy.  All week I have been leaving the house at 6am and havnt been home before 930pm every night.  LOL.  Just a busy time right now.  I plan to try to get some pictures of some stuff this weekend

NMKawirider - Simple solutions for simple minds like mine LOL

I guess i did snap a picture of the switches i put in (3 things in total) I put in the winch switch, the light bar switch, and the usb/volt meter

What is the switch on the bottom left for ??

[2015 Z Force 800 53/Trail EPS]

That's the override. You have one too. It gives you full power in diff-lock and reverse. It's a momentary switch but I was thinking of switching it out for an on/off switch.

That's the override. You have one too. It gives you full power in diff-lock and reverse. It's a momentary switch but I was thinking of switching it out for an on/off switch.

I never use it lol do you ? Or anyone ? Can it be taken out I took mine out and used the space for something else lol and here I thought it was a hazard light switch or something, lol stupid me