0 Members and 1 Guest are viewing this topic.

*

Online NMKawierider

Re: USB charger/Volt meter
« Reply #15 on: September 06, 2016, 11:30:39 PM »
That's the override. You have one too. It gives you full power in diff-lock and reverse. It's a momentary switch but I was thinking of switching it out for an on/off switch.

I never use it lol do you ? Or anyone ? Can it be taken out I took mine out and used the space for something else lol and here I thought it was a hazard light switch or something, lol stupid me
LOL..Yeah I've used it. You should have it... never know when you might need it.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline Jogon30

Re: USB charger/Volt meter
« Reply #16 on: September 07, 2016, 09:30:50 AM »
That's the override. You have one too. It gives you full power in diff-lock and reverse. It's a momentary switch but I was thinking of switching it out for an on/off switch.

I never use it lol do you ? Or anyone ? Can it be taken out I took mine out and used the space for something else lol and here I thought it was a hazard light switch or something, lol stupid me
LOL..Yeah I've used it. You should have it... never know when you might need it.
when would it come in handy ?

*

Online NMKawierider

Re: USB charger/Volt meter
« Reply #17 on: September 07, 2016, 09:45:56 AM »
That's the override. You have one too. It gives you full power in diff-lock and reverse. It's a momentary switch but I was thinking of switching it out for an on/off switch.

I never use it lol do you ? Or anyone ? Can it be taken out I took mine out and used the space for something else lol and here I thought it was a hazard light switch or something, lol stupid me
LOL..Yeah I've used it. You should have it... never know when you might need it.
when would it come in handy ?
Well, lets say you were out on Southern and you were in 4WD and about to hit one of those long sandy hills and you needed speed and needed the diff locked. Well without the override your RPMs are limited so your speed would be too so you may not get the momentum you need without being able to override the limiter. I have actually climbed the back side of "Lost Mountain" better not using diff-loc because of the limiter. It does way better with diff-loc but I have to hold the override with one hand all the way up. That sucks...that's why I think I will replace the switch with one that stays on by itself.

Ok, in reverse...lets say you were stuck in a draw where you needed to shoot up one side in reverse to get out or to go far enough to get a run at the other side but the damn thing won't go over like 4 grand and you just can't get enough with that. Override sets the rev limiter back up to the 7750..or whatever it is and you can get a far better run at it.

They do this for safety but they give you the ability to override it if really needed. 
« Last Edit: September 07, 2016, 09:48:44 AM by NMKawierider »
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline chuddly

Re: USB charger/Volt meter
« Reply #18 on: September 07, 2016, 10:08:53 AM »
Wow we have gotten off topic here LOL.  Im not worried about it and I will now add to the off topicness LOL.  What is the max revs we should run on these motors?
I can imagine a world completely at peace.  A world where there are no weapons, no war, and no violence at all.  And I can imagine us taking over that world because they would never expect it.

*

Online NMKawierider

Re: USB charger/Volt meter
« Reply #19 on: September 07, 2016, 10:29:01 AM »
Wow we have gotten off topic here LOL.  Im not worried about it and I will now add to the off topicness LOL.  What is the max revs we should run on these motors?
I think...and don't quote me, but I think the ECU's limiter is 7750. I personally keep it under about 6500..just because it's Chinese...lol

Sorry about going so far off-topic :)

2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline Jogon30

Re: USB charger/Volt meter
« Reply #20 on: September 07, 2016, 12:29:21 PM »
Wow we have gotten off topic here LOL.  Im not worried about it and I will now add to the off topicness LOL.  What is the max revs we should run on these motors?
Lol dang I'm sorry chuddly I just had to ask I messed up and took it off but back to the switch subject which mine is in order thank you! Does anyone off hand have the measurement of the square we have to cut I'm at work so don't have the switch here. So I can start makeing a template. Of Course on my boss's time lol...

*

Online NMKawierider

Re: USB charger/Volt meter
« Reply #21 on: September 07, 2016, 12:55:33 PM »
Wow we have gotten off topic here LOL.  Im not worried about it and I will now add to the off topicness LOL.  What is the max revs we should run on these motors?
Lol dang I'm sorry chuddly I just had to ask I messed up and took it off but back to the switch subject which mine is in order thank you! Does anyone off hand have the measurement of the square we have to cut I'm at work so don't have the switch here. So I can start makeing a template. Of Course on my boss's time lol...
Do you still have any of your blank plugs? If so, just use one of those....a chuddly-trick I learned.. :)

2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline Jogon30

Re: USB charger/Volt meter
« Reply #22 on: September 07, 2016, 02:24:42 PM »
Wow we have gotten off topic here LOL.  Im not worried about it and I will now add to the off topicness LOL.  What is the max revs we should run on these motors?
Lol dang I'm sorry chuddly I just had to ask I messed up and took it off but back to the switch subject which mine is in order thank you! Does anyone off hand have the measurement of the square we have to cut I'm at work so don't have the switch here. So I can start makeing a template. Of Course on my boss's time lol...
Do you still have any of your blank plugs? If so, just use one of those....a chuddly-trick I learned.. :)
no I don't

*

Offline chuddly

Re: USB charger/Volt meter
« Reply #23 on: September 07, 2016, 02:31:30 PM »
Im not worried about it being off topic at all LOL.  Continue down the rabbit hole LOL
I can imagine a world completely at peace.  A world where there are no weapons, no war, and no violence at all.  And I can imagine us taking over that world because they would never expect it.

*

Offline Jogon30

Re: USB charger/Volt meter
« Reply #24 on: September 07, 2016, 03:35:30 PM »
Im not worried about it being off topic at all LOL.  Continue down the rabbit hole LOL

Ok cool can anyone give me the size of the square that the switches go in  I don't get out of here for a few more hours lol?

*

Offline Cosmosdan

Re: USB charger/Volt meter
« Reply #25 on: September 07, 2016, 03:43:15 PM »
7/8 × 1 3/4
2013 Z6 Trail
Iron Baltic skid plates
UE Boom Speaker mount
RZR 800 Shocks
Mostly stock trail riding
25g. Rollers and A1

2016 Outlander max 570
Too new for mods yet

*

Offline Jogon30

Re: USB charger/Volt meter
« Reply #26 on: September 07, 2016, 03:56:59 PM »
7/8 × 1 3/4

Thank you cosmos ! 💪🏻💪🏻

*

Online NMKawierider

Re: USB charger/Volt meter
« Reply #27 on: September 07, 2016, 03:57:22 PM »
Ok cool can anyone give me the size of the square that the switches go in  I don't get out of here for a few more hours lol?
OK, when I measure the part of the blank the plugs the hole, I get 13/16 x 1-29/64. When I measure an actual switch body at the post end, I get 53/64 x 1-3/8.  And when I measure an actual hole..because I needed to see what wiring the override had..the hole measured 107/128 X 1-33/64.  Any will fit the switch tight enough that you might have to file the hole a hair.
« Last Edit: September 07, 2016, 04:34:06 PM by NMKawierider »
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline Jogon30

Re: USB charger/Volt meter
« Reply #28 on: September 07, 2016, 07:39:02 PM »
Ok cool can anyone give me the size of the square that the switches go in  I don't get out of here for a few more hours lol?
OK, when I measure the part of the blank the plugs the hole, I get 13/16 x 1-29/64. When I measure an actual switch body at the post end, I get 53/64 x 1-3/8.  And when I measure an actual hole..because I needed to see what wiring the override had..the hole measured 107/128 X 1-33/64.  Any will fit the switch tight enough that you might have to file the hole a hair.
Lol switch back in !! Thanks

*

Offline bezerk1

Re: USB charger/Volt meter
« Reply #29 on: September 21, 2016, 04:19:23 PM »
What a great idea.  I can easily charge my Go-Pro.  Fits perfect.