My local dealer her sucks at getting me parts even after they said he signed up with cf Moto Canada ...yeah right!! I just emailed cf Moto to see if I can order me some lets see what happens

Here is my dealer... the service manager is Rick. I would have a chat with him (good guy) and see if you can just order it from them and just pay for the product and shipping from there. I would most likely have it sent to you through Canada Post/USPS, it will probably be the most reasonable and best way to get it to you.
Also don't forget, your money is worth approximately 30% more than ours so that means $100. Canadian dollars will only cost you around $70 US Dollars! Lucky bugger!

Tweed Recreational & Lawn

(613) 478 3138

tweedsport and lawn.ca

Just got off the phone with Rick nice guy by the way and he is telling me cf Moto is on Backorder and to check back with in a month 😭😭😭😭 lol but I will and thanks for the post and number

Holy-Sh...107 US each from my supplier. The fronts and 95 each...F..K:

http://www.alpha-sports.com/cfmoto_parts.htm

I can do 99 for the rears... but the reason why is the international shipping plus import fees. It kills us getting parts from Canada.

Holy-Sh...107 US each from my supplier. The fronts and 95 each...F..K:

http://www.alpha-sports.com/cfmoto_parts.htm

I can do 99 for the rears... but the reason why is the international shipping plus import fees. It kills us getting parts from Canada.

Like I said in my thread...Canada Post/USPS will be your best bet for shipping. Also because the product is from Canada, it probably falls under NAFTA so there won't be any duty. The biggest thing is, you are still paying 30% less of the price quoted right off the bat! That should cover any inconveniences?

Just got off the phone with Rick nice guy by the way and he is telling me cf Moto is on Backorder and to check back with in a month 😭😭😭😭 lol but I will and thanks for the post and number

Yes he is a nice guy. I thought I had posted that they were on backorder till Dec. Oh well. Please have look at my prior post for shipping and dutyou concerns!

Holy-Sh...107 US each from my supplier. The fronts and 95 each...F..K:

http://www.alpha-sports.com/cfmoto_parts.htm

I can do 99 for the rears... but the reason why is the international shipping plus import fees. It kills us getting parts from Canada.

Like I said in my thread...Canada Post/USPS will be your best bet for shipping. Also because the product is from Canada, it probably falls under NAFTA so there won't be any duty. The biggest thing is, you are still paying 30% less of the price quoted right off the bat! That should cover any inconveniences?

::sigh:: yes, there are taxes and duty fees to pay. I order parts and send parts into Canada daily. Feel free to call CMI (CFMoto Canada) and talk to them about shipping parts to the US. Again, as a CFMOTO DEALER i can assure you, there ARE DUTY FEES & TAXES.

What you also fail to realize is the part was imported into Canada. The part originated from China so it wouldnt fall under NAFTA anyway.

I think Emerson is correct I went to my local dealer this morning  and to order anything from cf Moto Canada would be a grip of cash on shipping and they also said it would not be 30% cheaper in (USD) So I went with nmkawi's design and got both side fenders and wings no shipping charge for 115 usd will take about a week to get here.

[2015 Z Force 800 53/Trail EPS]

The only bummer is cutting up a 54-dollar fender...well..two of them...and that there still isn't something on the front side of the tire. I do have a plan for that though.

On a side note, my SuperATV harnesses came in today. I had the chance to check out Jodon30's the other day and the quality was just fine. And you get two for what you would pay for one with another brand. I think I am going to try and leave the OE belts in as well but we'll see if that's even practical.

You are going to love them bud I use them all the time so much better then the seatbelts good luck on the install I'm sure you will figure out sonething your a pretty smart guy...lol if not I can email u some pics on how I installed them might help u out or give you a few ideas.

Dang it (nmkawi) I'm hooked so please tell us what are your plans for your front fenders? Come on I'm thinking of buying the same ones you got for the front and chopping  them up as well there only about 30 bucks but I won't do it if you got a better idea.hahahah

[2015 Z Force 800 53/Trail EPS]

Dang it (nmkawi) I'm hooked so please tell us what are your plans for your front fenders? Come on I'm thinking of buying the same ones you got for the front and chopping  them up as well there only about 30 bucks but I won't do it if you got a better idea.hahahah

Well...OK, I wasn't going to say anything until I either make it work or not, but after seeing some of what the guys in Russia are doing to extend theirs I thought of sheet ABS which has a slight texture on one side, very moldable and super tough. I just ordered  4 custom cut 8" wide x 48" long x 1/8" thick sections to build them out of. I'll do the fronts in one piece and can either replace the rears with a one piece or just add some front sections to what I have now.

I ordered them from these guys. They also have some interesting videos on forming this stuff. I have everything I need to do this. I can leave the outside edge straight or.. roll it slightly if I want. Leaning toward keeping it simple and stout though. 56 bucks shipped for enough to do all four. They will require some fabrication and that's OK. I have to consider I already spent a boat load on the EX fenders that didn't pass the test.   

http://www.tapplastics.com/product/plastics/cut_to_size_plastic/abs_sheets/524


By the way, I can't find a way to cut the EX fronts down to make them fit and look worth a ...hoot.

Just checked out the website and dam that's some crazy stuff now if you build some fenders and they come out sick you know you will have me knocking at your door lol hahah that's some awesome stuff.

[2015 Z Force 800 53/Trail EPS]

Just checked out the website and dam that's some crazy stuff now if you build some fenders and they come out sick you know you will have me knocking at your door lol hahah that's some awesome stuff.

I figure the 1/8" thick stuff is about the same as what the OEs are and at 11- bucks each beats  90+ each. Just some heat bending and some trimming. I also found and bought some better push-pins that have a larger head that support better. Bought 120 of them for 12 bucks. Here's a link:

http://www.amazon.com/gp/product/B0123FKSEW?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00 

Here is a pic of my chopp shop rear fender flares lol well that's what my old lady called them lol thanks to (nmkawi) for this mod I think they came out good not to bad at all I showed a few friends and everyone thought they were stock so I'm good with them now I just got to get out and test them out.....