I recently purchased a 2009/10 uforce 500 (label says model XY500-s).  It runs well, but there are things that I have to do to it, but I'm not sure where to find some info.  Would appreciate any help you can provide.

The person that had the side by side before me, did some things to get it running (was left idle for a long time).  However, there are some open ports on the engine that I'm certain require some air lines or something.  I can't image they are by design.  Can any of you direct me to a schematic that shows the cooling system / exhaust system?

Also, how do I find out the brake part numbers, etc?

Thanks and happy trails.

[2015 Z Force 800 53/Trail EPS]

I recently purchased a 2009/10 uforce 500 (label says model XY500-s).  It runs well, but there are things that I have to do to it, but I'm not sure where to find some info.  Would appreciate any help you can provide.

The person that had the side by side before me, did some things to get it running (was left idle for a long time).  However, there are some open ports on the engine that I'm certain require some air lines or something.  I can't image they are by design.  Can any of you direct me to a schematic that shows the cooling system / exhaust system?

Also, how do I find out the brake part numbers, etc?

Thanks and happy trails.

XY powersports was not a division of CF Moto. They are a Chinese company and did use the CFMoto engines but...that's about it. CFMoto did have a 500 UTV called the Rancher at that time...the prelude to the UForce. I did find a link to a service manual for what should be your machine. And you are right, there should be no open ports on any engine. Here's that link:

https://www.manualslib.com/products/Xy-Powersports-Xy500utv-4086899.html