0 Members and 1 Guest are viewing this topic.

*

Offline wayne gulliver

zforce 500
« on: July 30, 2016, 02:22:38 PM »
My new zforce 500 sometimes will quit after I start it then it will not start for 5 to 10 minutes as if nothing is wrong. The first time it happened after about 20 minutes trail driving a error code flashed on the dash it backfired and quit,then it would not start for about 30 minutes.I took it back to the dealer and they say they fixed it. It did it again today,started then quit. I had to wait for 5 to 10 minutes before it would catch and run?

*

Offline Cosmosdan

Re: zforce 500
« Reply #1 on: July 30, 2016, 06:34:58 PM »
Sounds like it's flooding. Maybe something is cutting the spark off. Wheels had mentioned unplug the harness the starter relay. Check the 500ho posts to see what he said about it. Hope he or someone can chime in on this.
2013 Z6 Trail
Iron Baltic skid plates
UE Boom Speaker mount
RZR 800 Shocks
Mostly stock trail riding
25g. Rollers and A1

2016 Outlander max 570
Too new for mods yet

*

Offline NMKawierider

Re: zforce 500
« Reply #2 on: July 30, 2016, 07:34:09 PM »
There has been some issues with the main fuse connector getting hot on some others. Gets hot, breaks connection, dies, takes a while to cool down and re-connect then starts.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline JJram82

Re: zforce 500
« Reply #3 on: July 30, 2016, 10:01:13 PM »
I have a new Z Force 500 and just barely over a hundred miles on it but so far it has been flawless

*

Offline wayne gulliver

Re: zforce 500
« Reply #4 on: August 02, 2016, 05:54:02 PM »
If the main fuse was open with being hot than the engine would not crank?

*

Offline NMKawierider

Re: zforce 500
« Reply #5 on: August 02, 2016, 06:02:25 PM »
If the main fuse was open with being hot than the engine would not crank?
If the main fuse broke contact, nothing would work. It would be like the battery was disconnected. Also keep in mind any fuse in the fuse holder can do the very same thing and just what that one powers won't work.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube